







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The North Miami Owner’s Guide
Dvele kitchen remodeling in North Miami typically runs $16,520 to $53,100 installed, depending on layout, cabinet line and countertop material. We handle the full scope: demolition, cabinet work, counters, backsplash, island builds and the finish work that makes a kitchen hold up in South Florida humidity. Dvele homes are modular, built to tight factory tolerances, and that changes how a remodel gets planned – especially when the failing part is something the original build got slightly wrong for this climate.
Owners usually discover the problem the same way. A cabinet box near the sink starts to swell at the bottom edge. A counter seam lifts a hair above the quartz. A drawer front won’t sit flush anymore no matter how many times the hinge gets adjusted. Then someone pulls the drawer out, sees water staining on the substrate under the counter, and realizes the failure has been running quietly for a year. That’s the moment this page is written for.
Which Dvele Models This Applies To

Dvele builds homes in several lines, and the kitchen millwork specs shift between them. Older Dvele builds often use a standardized cabinet box depth and a 24-inch base cabinet run that doesn’t match off-the-shelf replacements from big-box stores. Newer builds moved to different hinge boring patterns and drawer slide mounting. You’ll find the model and serial information on the label inside the cabinet door or on the panel behind the toe kick – photograph it before you order anything.
The compatibility gotcha most North Miami Dvele owners hit: factory cabinet boxes in these homes frequently use a metric panel thickness that is a hair off from the standard 3/4-inch stock at local suppliers. A replacement door or drawer front cut to imperial spec will look right on the shelf and sit proud or recessed once installed. We measure the actual panel, not the nominal spec.
On OEM versus aftermarket: Dvele doesn’t sell cabinet parts as a consumer retail line the way a brand like KraftMaid does through dealer channels. What Dvele-specific parts you can source usually come through the modular builder’s warranty path or a specialty millwork supplier who can match the profile. Aftermarket equivalents from a recognized line like KraftMaid or Wellborn often work better in this climate anyway – the finishes and box construction are built for humidity, and they carry their own manufacturer warranty on top of our workmanship guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
- Cabinet box swelling at the bottom, especially near the sink or dishwasher. This is moisture wicking into the particleboard core. In North Miami, the combination of year-round humidity and a dishwasher that vents steam into the cabinet run is enough to do it – the box fails before the door does.
- Countertop seams lifting or darkening. A seam that shows a shadow line or a stain along the edge means the adhesive has let go or water is getting under the counter. Quartz seams don’t fail on their own; they fail when the cabinet run underneath has shifted.
- Drawer slides that bind halfway. On Dvele kitchens this is often the slide mount pulling out of a softened panel, not a bad slide. Replacing the slide without fixing the panel underneath gets you a repeat failure in a few months.
- Backsplash grout cracking in a horizontal line. A crack that runs level across the wall usually tracks a seam in the substrate behind the tile – typical where a modular wall panel meets field framing.
- Island rocking or a gap at the floor. Modular floors aren’t always dead flat, and an island set on shims can work loose. Left alone, the counter above it starts to stress at the seams.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers break down for North Miami, installed, with the part and labor shown honestly:
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the range: cabinet line and box construction, countertop material (a Cambria quartz run sits at the top, a Silestone or Caesarstone run lands mid-range), and how much the substrate behind the failing part needs to be rebuilt versus patched. We write the price before any work starts – not a ballpark, a written number you can hold us to. Every job carries the 365-Day Done Right Promise: if the work fails in that window, we come back and fix it at no charge, and the part and labor warranty is written into the job.
DIY or Call Us?
What you can safely check yourself: photograph the model label inside the cabinet, measure the panel thickness and cabinet depth, and note where the moisture staining starts. That’s real information and it saves time on the estimate. What goes wrong on the install side is usually the substrate – a homeowner replaces a swollen cabinet bottom and puts it back on the same moisture path, or resets a counter seam without addressing the shift underneath. On anything involving a gas line or electrical behind the cabinet run, stop and call a professional; that’s not a DIY job and no honest contractor will tell you it is.
Call (888) 255-7411 and we’ll give you a real number before anyone picks up a tool. A live person answers around the clock, and the estimator arrives in the window we set.
FAQs

Factory cabinet boxes in a Dvele home typically hold up 12 to 18 years in this climate if the moisture path is managed, and counters can go longer. The North Miami humidity is the variable – a kitchen with a dishwasher that vents into the cabinet run and no dehumidification will see box swelling years earlier than the same kitchen in a drier region. Call (888) 255-7411 for a free assessment before a small failure turns into a full cabinet run.
Sometimes, yes – a single drawer slide, hinge or door front can often be swapped without touching the box. It’s not repairable when the panel core has swelled or softened, because the fastener won’t hold in compromised material and you’ll be back to the same problem. We’ll tell you which one you’re looking at, honestly, before quoting replacement. Call (888) 255-7411 for an exact quote – estimates are free.
A single part replacement or one cabinet box runs a few hours to a day. A cabinet run, counter and backsplash together runs several days, and a full kitchen remodel in North Miami runs weeks depending on scope and material lead times. We give you the arrival window and the schedule in writing. Call (888) 255-7411 to lock in your free estimate.
We measure the actual cabinet panel and profile, then match to the closest equivalent from a recognized line – KraftMaid and Wellborn for cabinet boxes and doors, Cambria, Silestone and Caesarstone for counters – or work through the Dvele warranty path where a factory part is genuinely required. We don’t claim to stock Dvele parts and we don’t carry them on a truck; every part is ordered to your kitchen. Penhallow Remodeling North Miami is an independent service provider and isn’t affiliated with Dvele. Call (888) 255-7411 to schedule your free estimate.
Dvele kitchens in North Miami deserve a remodel plan that respects the modular build and the climate it sits in. Whether the failing part is one drawer or a whole counter run, we’ll write the number down first, show up in the window, and stand behind the work for 365 days. Call Penhallow Remodeling North Miami at (888) 255-7411 for your free estimate – a live person answers any time.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












