







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why North Miami Homeowners Choose Delta Construction
We provide independent Delta construction service in North Miami for homeowners whose Delta faucets, shower valves, and fixtures need diagnosis, repair, or replacement. What makes our Delta work different is that we track what actually fails in Delta products installed in South Florida homes – cartridge wear from mineral-heavy water, finish breakdown in salt air, Touch2O electronics that quit – and match the right OEM or quality replacement part to the job. We’re not affiliated with or authorized by Delta. We’re an independent Delta service provider, which means you get an honest read on whether a $30 cartridge fixes it or you genuinely need new fixtures.
Why Trust Penhallow Remodeling North Miami for Your Delta Construction?

Our technicians have up to 22 years of experience, and a good share of that time has been spent with Delta trim in hand. We know the Monitor 13/14 Series valve body well enough to tell a pressure-balance cartridge problem from a scald-guard issue by how the handle feels and where the temperature drifts. We know that a Trinsic kitchen faucet with Touch2O behaves differently when the solenoid is failing than when the battery pack is simply low. That kind of hands-on familiarity saves you from replacing a whole fixture over a part.
OEM-compatible parts matter more than most homeowners realize. A non-OEM cartridge in a Monitor valve can fit loose enough to cause the same temperature swing you just paid to fix, and an aftermarket solenoid on a Touch2O faucet can drain batteries in weeks. We source OEM Delta cartridges and repair kits for the valves and faucets we service, and turn to quality aftermarket suppliers only when a part is discontinued or backordered – and we tell you when that happens. Our work is warranty-safe: we don’t do anything to a Delta fixture that would void the manufacturer’s coverage, and if our own repair fails we come back under the 365-Day Done Right Promise at no charge. Written price before any work starts, every time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Fix in North Miami
North Miami’s humidity, salt air, and hard water push Delta fixtures hard. Here’s what we see most.
- Monitor 13/14 Series temperature drift. The pressure-balance cartridge inside these tub/shower valves wears down and starts letting hot and cold water cross, which shows up as a steady handle producing water that swings from warm to scalding and back. In older homes with mineral-heavy supply, clogged inlet screens make it worse. A new OEM cartridge usually corrects it.
- Touch2O and ShieldSpray electronics failure on Trinsic and Essa kitchen faucets. The solenoid or battery pack gives out, and suddenly the faucet won’t respond to touch, or it runs constantly and won’t shut off. Battery corrosion from humid air is a frequent culprit, sometimes combined with a solenoid that’s simply reached the end of its service life.
- Finish pitting on Venetian Bronze and Champagne Bronze bath faucets. Coastal salt air and constant bathroom humidity break down the clear coat over these living finishes, and once it pits, the bronze darkens unevenly and starts to flake. It’s a real pattern in North Miami bathrooms that see steam daily.
- Diverter spout O-ring failure. The O-ring inside the tub spout dries out and cracks, so water leaks behind the spout or the shower head won’t get full flow. Cheap to fix, easy to misdiagnose as a valve problem.
- Showerhead flow restrictor clogging. Hard water leaves mineral scale in the restrictor and the spray pattern narrows or sprays sideways. Sometimes the answer is a cleaning and a new restrictor, not a new showerhead.
Delta Parts & Our Repair-vs-Replace Approach
We don’t keep Delta parts in stock – parts are sourced for each job so you get the correct OEM cartridge, solenoid, or kit for your exact model rather than whatever’s on a shelf. That matters with Delta. The Monitor 13/14 Series cartridge has to match the valve body revision, and the wrong one reintroduces the temperature swing. When the valve body and trim are sound, we repair rather than replace. Often a $20-$40 cartridge solves a problem a big-box quote would answer with a full fixture replacement. When the finish is pitted through and the trim is compromised, or a discontinued model can’t source the right part, we’ll say so honestly and walk you through replacement options – no pressure either way. Call (888) 255-7411 and we’ll give you a written price before any work starts.
Our Delta Service Process – Step by Step
- 1
Diagnosis. We test the fixture in place – handle feel, temperature response, flow, electronics on a Touch2O faucet – and identify the exact model and series so the right part gets ordered.
- 2
Repair or install. For a valve, that means shutting off water, pulling the cartridge, flushing the valve body, and installing the new OEM part. For a replacement, we set the new Delta fixture and align the trim cleanly.
- 3
Test. We run the fixture through its full range – hot/cold balance, showerhead and diverter flow, Touch2O response – and check for leaks at every connection before we leave.
- 4
Warranty. You get a written guarantee on the repair, and the 365-Day Done Right Promise behind it. If it fails inside that period, we come back and fix it at no charge.
Delta Products We Service & Install in North Miami
We work across the Delta lines that show up in North Miami homes most: Monitor 13 and 14 Series tub/shower valves; the Victorian and Cassidy bathroom faucet collections; Trinsic and Essa kitchen faucets, including Touch2O and ShieldSpray models; and Lahara and Addison widespread lavatory faucets. Beyond faucets and valves, our Delta-related work leans on the projects that surround them – walk-in shower installation, tub-to-shower conversion, and bathroom vanity installation – so when a valve needs replacing mid-renovation, or you’re converting a tub surround to a walk-in with new Delta trim, it’s handled by one point of contact under one written price.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Delta isn’t the only name in your home. We also work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, so a bathroom or kitchen project that touches several brands stays with one contractor instead of three. If your Delta faucet sits over a Cambria vanity top, that’s a job we can price and handle together.
Pricing for Delta-Related Projects in North Miami

If your Delta valve or fixture work rolls into a bigger bathroom project, here are the ranges we quote in the North Miami market. These are real written ranges, not ballparks that move after demo.
| Project | Typical Range |
|---|---|
| Walk-In Shower Installation | $5,310 – $14,160 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Bathroom Vanity Installation | $945 – $3,540 |
What drives the number up or down: whether the valve body needs replacing alongside new trim, tile and waterproofing scope, and the finish level on the shower door and trim. A tub-to-shower conversion that reuses a sound Delta valve sits at the low end; a walk-in with a new pan, tile, and a fresh valve sits higher. We put the number in writing before we pick up a tool.
FAQs – Delta Construction Service in North Miami
No. We’re an independent Delta service provider and are not affiliated with or authorized by Delta. We know their product lines and common failure points because we work on them constantly, and we use OEM parts to keep things warranty-compatible – but any official warranty claim runs through Delta, not us. Call (888) 255-7411 for a free estimate on our work.
We use OEM Delta cartridges and repair kits for valves like the Monitor 13/14 Series, because fit and warranty compatibility depend on it. We turn to quality aftermarket suppliers only when OEM parts are discontinued or backordered, and we tell you when that’s the case so you can decide.
Most single-fixture jobs – a cartridge replacement, a spout O-ring, a solenoid swap on a Touch2O faucet – are done within a single visit, usually a couple of hours including testing. If a part has to be ordered for your specific model, we give you a real arrival window once it’s in hand. Call (888) 255-7411 to schedule and we’ll confirm what your job needs.
We cover Monitor 13 and 14 Series tub/shower valves, Victorian and Cassidy bath faucets, Trinsic and Essa kitchen faucets including Touch2O and ShieldSpray, and Lahara and Addison widespread lavatory faucets, plus the shower and vanity work around them.
No – we work in a warranty-safe way, using OEM parts and standard service practices that keep your Delta coverage intact. We don’t alter fixtures in ways that would void the manufacturer’s warranty, and our own written guarantee sits alongside it.
Delta fixture service itself is modest – a replacement cartridge typically runs $20-$40 in parts plus labor. If your Delta work is part of a larger bathroom project, walk-in shower installation runs $5,310-$14,160, tub-to-shower conversion $4,130-$11,800, and vanity installation $945-$3,540. Call (888) 255-7411 for an exact quote – estimates are free and written.
Book Your Delta Service in North Miami, FL

Whether it’s a drifting Monitor valve, a quiet Touch2O faucet, or a full tub-to-shower conversion with new Delta trim, we’ll give you a written price before any work starts and stand behind it for 365 days. Call Penhallow Remodeling North Miami at (888) 255-7411 to schedule your free estimate.
Written by the team at Penhallow Remodeling North Miami.












