







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why North Miami Homeowners Choose ViewLux Construction
We provide independent ViewLux construction service in North Miami – cabinet installation, refacing, quartz countertops, and small or partial kitchen remodels – with a written price before any work starts. What sets our ViewLux work apart is spec-level familiarity with how ViewLux boxes, doors, and finishes actually go together in South Florida homes. We’re not affiliated with or authorized by ViewLux; we’re an independent provider, and that independence means our recommendation comes from the job in front of us, not a factory program. Call (888) 255-7411 for a free estimate.
North Miami is a particular place to install cabinetry. The city sits in the heart of Miami-Dade’s High Velocity Hurricane Zone, and nearly every construction project here has to clear the county’s strictest wind-mitigation rules: NOA-approved impact products, continuous load paths, and product approval on almost everything, all inspected through Miami-Dade’s own system rather than a generic Florida code. That matters even for interiors, because a permit that triggers a wind review pulls the whole scope into a different review lane. Then there’s the post-1994 building code split. The city’s housing stock is a mix of 1950s – 70s single-family ranch homes and small stucco-over-CBS block houses alongside new mid-rise and townhome infill, and many of those older North Miami homes carry pre-Andrew construction requiring retrofit tie-downs and updated shutters during any major renovation. We plan ViewLux installs around that reality.
Why Trust Penhallow Remodeling North Miami for Your ViewLux Construction?

Our technicians have up to 22 years of experience, and much of that experience is on ViewLux’s own product families: the Shaker-style full-overlay cabinet line, the raised-panel traditional series, the slab and minimalist door fronts used in modern kitchens, and the quartz and solid-surface countertop program. That matters because ViewLux is not a generic box. Its full-overlay hinges sit at specific boring patterns, its filler and end-panel profiles are cut to match a particular reveal, and its soft-close glide sets have their own mounting geometry. We know where those tolerances tighten and where they slip after a few humid seasons.
We use OEM-compatible ViewLux hinges, glides, fillers, and matched door and drawer fronts so finish and fit stay consistent, and we substitute quality aftermarket equivalents only for concealed hardware and interiors when OEM lead times run long. Nothing we do voids a warranty. We work in a way that preserves the manufacturer’s coverage: no cutting into finished faces for hardware that wasn’t specified, no field-refinishing that changes the factory finish, no fastening through the cabinet back where a warranty reviewer would look. That’s a plain operating standard, not a marketing line. And every job carries a written price before any work starts plus our 365-Day Done Right Promise – if the work fails inside the guarantee period, we come back and fix it at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ViewLux Construction Problems We Fix in North Miami
These are the failures we see most often on ViewLux cabinetry in North Miami kitchens, and why they happen.
- Door and drawer fronts pulling away or delaminating at hinge and edge-band seams. In high-humidity North Miami interiors, the edge banding on ViewLux fronts absorbs and releases moisture through the seasons, and the seam along the hinge boring is the first place it shows. The front doesn’t fail because of load; it fails because the substrate behind the band swells and the adhesive lets go from the inside out.
- Soft-close hinges and drawer glides loosening or failing under daily load. ViewLux soft-close hardware is durable but not immune to the combination of humidity and a household that opens the same three drawers fifty times a day. We see screws backing out of the hinge plate, glide tracks dropping a few millimeters, and doors that were flush at install riding low on one corner within a year or two.
- Thermofoil or laminate finishes blistering or peeling near the range, dishwasher vent, and sink area. Heat and steam are the culprits. A dishwasher vent that exhausts straight into the cabinet cavity, or a range hood that’s undersized for the cooking happening under it, pushes moist hot air against a finished surface that wasn’t designed to take it continuously. North Miami’s salt-air coastal humidity makes the recovery slower, so damage compounds.
- Toe-kick, filler, and end-panel joints separating as seasonal humidity swings move the boxes. ViewLux boxes are dimensionally stable, but the trim pieces are thinner stock and move faster. We routinely find toe-kick joints opening at inside corners and end panels standing a few degrees off plumb after a wet summer followed by a dry spring.
- Quartz and solid-surface seams or edge joints showing at the sink cutout and cooktop. ViewLux’s quartz program is a strong material, but a seam placed poorly relative to a heat source or a cutout can telegraph over time – especially when the cabinet boxes under it have shifted. The counter usually gets blamed; the substrate usually caused it.
There’s a scenario that shows up again and again in North Miami. A ViewLux kitchen call starts with doors that no longer sit flush and drawers that drag, usually traced to worn soft-close hinges and glides combined with swelling at the cabinet edges after a humid summer. A qualified local installer checks the boxes for swelling, replaces the failing hardware with a matched hinge and glide set, re-squares the door fronts, and reseals exposed edges. New cabinetry becomes the recommendation only when the boxes or finishes are compromised beyond adjustment.
ViewLux Parts & Our Repair-vs-Replace Approach

We source ViewLux-specific OEM hinges, glides, fillers, and matched door and drawer fronts wherever they’re available, because finish consistency matters more than most homeowners realize until they see a mismatched door on a run of twelve. For concealed hardware and interior components, a quality aftermarket equivalent is a sound substitute when OEM lead times stretch into weeks – the hardware is invisible and the fit is what counts. We don’t claim to stock ViewLux parts locally; every part is sourced for the job at hand.
The repair-versus-replace call is where an honest assessment earns its keep. When a single failed face or a worn glide can be swapped, that beats re-fronting the whole kitchen. When boxes are swollen through the core, or when multiple finishes across the run are failing at once, replacement of the affected run is the right recommendation, and we’ll say so plainly with the reasoning. We’ve walked away from re-front work that would have looked fine on day one and failed inside a year.
If you’re unsure whether your ViewLux kitchen needs a repair or a replacement, call (888) 255-7411 – estimates are free and the assessment is straightforward.
Our ViewLux Service Process – Step by Step
- 1
Diagnosis. We check the ViewLux boxes for swelling, squareness, and hinge-boring integrity before we touch hardware. On a countertop issue, we check the substrate first. This is where we determine whether the problem is a component failure or an underlying box or moisture issue.
- 2
Scope and written price. You get a line-item written price before any work starts, including whether we’re replacing OEM fronts or matching aftermarket hardware, and where the material is coming from. No verbal ballpark.
- 3
Repair or install. Matched hardware goes in, fronts get re-squared, exposed edges get resealed with a ViewLux-appropriate finish product, and where we’re installing new boxes we confirm plumb, level, and the correct shim at the wall before setting any front. On countertops, the seam layout is confirmed with you before the cut.
- 4
Test. Every soft-close hinge and glide gets cycled. We check door clearance against frame and range, drawer pull alignment front-to-back, and countertop seams under raking light. Anything that doesn’t sit right gets corrected before we leave.
- 5
Written warranty and the 365-Day Done Right Promise. You receive a written guarantee on the work. If something fails inside the guarantee period, we come back and fix it at no charge – and the free return visit is standing policy, not a favor.
See the difference
Before
After
Before
After
Before
AfterViewLux Products We Service & Install in North Miami
We work on the ViewLux Shaker-style full-overlay cabinet line and the raised-panel traditional series, along with the slab and minimalist door fronts used in modern North Miami kitchens and the ViewLux quartz and solid-surface countertop program. Our sub-services around ViewLux are cabinet installation and refacing, quartz and granite countertops, and small and partial kitchen remodels – the scope where ViewLux cabinetry lives. We also install KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler and Moen fixtures when a project calls for a mixed-material approach. We source parts and fronts per job; we don’t claim to stock ViewLux product locally.
We Also Service These Brands
We’re multi-brand by design. Alongside ViewLux, Penhallow Remodeling North Miami services and installs KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler and Moen fixtures – so if your kitchen has a mixed set of brands, or you’re weighing a ViewLux reface against a KraftMaid replacement, we can give you an honest side-by-side without steering you toward a single manufacturer. That’s what independent service means in practice.
FAQs – ViewLux Construction Service in North Miami

No. We’re an independent provider, not a ViewLux dealer or authorized service center. We work with ViewLux cabinetry and surfaces based on hands-on experience with the product lines, and our recommendations reflect what the job needs rather than any factory program. Call (888) 255-7411 for a free estimate.
Yes, wherever they’re available. We source ViewLux-specific OEM hinges, glides, fillers, and matched door and drawer fronts so the finish and fit stay consistent with the rest of your kitchen. For concealed hardware and interiors, we use quality aftermarket equivalents when OEM lead times run long; those parts are invisible once installed, and we’ll tell you which is going in.
Most single-face or hardware repairs are a one-visit job; a reface or partial remodel depends on lead time for matched fronts and whether the boxes need correction underneath. We give you the timeline in writing as part of the written price before work starts. For an accurate read on your North Miami job, call (888) 255-7411 – estimates are free.
We cover the ViewLux Shaker-style full-overlay line, the raised-panel traditional series, the slab and minimalist door fronts, and the quartz and solid-surface countertop program – from cabinet installation and refacing through countertop fit and backsplash. If you’re not sure which ViewLux series you have, we can identify it during the estimate.
Not the way we work. We avoid practices that would compromise manufacturer coverage: no cutting into finished faces for hardware that wasn’t specified, no field-refinishing that changes the factory finish, and no fastening through the cabinet back. If a repair touches something a warranty reviewer would care about, we’ll say so before we start. Call (888) 255-7411 for a free estimate.
Here’s what ViewLux cabinet and countertop work typically runs in North Miami:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Kitchen Remodel | $16,520 – $53,100 |
What drives the number up or down: whether you’re re-fronting existing ViewLux boxes or installing new ones, the cabinet line and countertop material you choose, whether the rooms have water damage or swelling underneath, and whether the configuration requires a permit triggering a Miami-Dade wind review. Call (888) 255-7411 for an exact quote – estimates are free and the written price is what you’ll pay.
Book Your ViewLux Service in North Miami, FL
Whether your ViewLux kitchen needs a hardware refresh, a reface, or a small remodel done around existing boxes, we’ll give you a written price before any work starts and a written guarantee when it’s finished. A live person answers the phone around the clock, and technicians are background-checked and arrive in uniform. Call Penhallow Remodeling North Miami at (888) 255-7411 to schedule your free estimate.
Written by the team at Penhallow Remodeling North Miami.












