







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Opa-locka, FL
We provide independent CGI construction service across Opa-locka, and the thing that sets our work apart here is flashing and trim detail on 1920s Moorish Revival facades – sculpted stucco, arched openings, and window returns that ordinary installers mangle. Penhallow Remodeling North Miami connects homeowners to independent local professionals who install and repair CGI impact windows, standing seam metal roofing, and hurricane-rated glazing regularly. We’re not affiliated with or authorized by the manufacturer, and no manufacturer warranty is implied. For a written price before any work starts, call (888) 255-7411.
Why Opa-locka Residents Choose Us for CGI Service

Most Miami-Dade contractors have never worked inside a design-review overlay. In Opa-locka, that’s the baseline reality, and it changes how a CGI scope gets put together. Our technicians have up to 22 years of experience with impact glazing, standing seam panels, and the retrofit work that aging housing stock demands, and they treat the historic detailing as part of the job rather than an obstacle.
We use CGI OEM gaskets, fasteners, and flashing kits whenever they’re available, because aftermarket seals on a South Florida window fail faster under UV and wind-driven rain. Parts are sourced per job to the model and configuration we’re working with; we don’t claim local stock, and we don’t pretend to. Every homeowner gets a written price before a tool comes out of the case, plus a real arrival window. The 365-Day Done Right Promise backs the work in writing, and a live person answers the phone around the clock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Opa-locka
These are the failure patterns we see most often on CGI products in this city, each tied to a condition specific to Opa-locka’s climate and building stock.
- Impact glazing seals and gaskets breaking down. Opa-locka’s intense sun and heavy summer rainbands chew through perimeter seals faster than inland homeowners expect, and once the gasket goes, water gets past the frame and into the wall cavity. We reseal with OEM gaskets where the unit is sound and recommend replacement only when the frame or glazing is actually compromised.
- Standing seam fastener grommets and panel laps loosening. Storm-cycle wind uplift works on 24-gauge Galvulume panels a little at a time, and the first sign is a progressive leak at a seam rather than a dramatic failure. We check fasteners, grommets, and laps as part of a repair visit and re-set what’s pulling.
- Hairline stucco cracks on the 1920s Moorish Revival buildings. The same sun that fades paint bakes porous historic stucco until it cracks in fine patterns, and that’s how moisture gets behind a CGI window or door retrofit. The repair has to match a decorative geometry, not just patch a flat wall.
- Improper sill pan flashing on original wood-frame openings. In 1950s to 1970s concrete-block homes, CGI impact units often start leaking at the sill because the original rough opening was never flashed when the unit was set. Rain wicks into the block wall and the damage shows up months later.
- Decorative stucco returns damaged during window and door swaps. Horseshoe openings, arches, and minaret bases have trim returns that a standard crew will cut square and patch flat. We match the sculpted profile so the facade reads the way it was built to.
CGI Service in Opa-locka: What Local Conditions Mean for Your Equipment
Opa-locka’s historic core is a Moorish Revival city built in the 1920s, with domed towers, minarets, and ornate stucco, and it sits under a genuine architectural-design review overlay. That matters for CGI work in a way it doesn’t in Hialeah or Miami Gardens, where plain block-and-stucco jobs never trigger a compatibility review at all. Swapping an impact window on an arched facade near the historic core can require design compatibility review before a permit moves, and the flashing detail has to respect sculpted geometry rather than a flat wall plane. If you own one of the 1950s to 1970s concrete-block homes in the surrounding neighborhoods, your scope is different again: original wood-framed windows with rough openings that were never properly flashed. Two properties a few blocks apart can carry two completely different CGI plans, and we price them that way from the start rather than discovering the difference after demo.
CGI Models & Products We Service in Opa-locka
We work on the CGI Sentinel series impact windows and sliding glass doors, CGI standing seam metal roofing panels in 24-gauge Galvalume, CGI impact-rated entry and patio door systems, and CGI hurricane shutter and window protection products. On every job we try OEM parts first: gaskets, fasteners, and flashing kits from the manufacturer’s own supply chain, because the aftermarket alternatives don’t hold up as long in South Florida UV and wind-driven rain. Where a CGI window or roof panel is structurally sound, resealing and re-flashing is the honest recommendation; where the frame or glazing unit is compromised, full replacement is. For a CGI service scope built around your specific model and the conditions it faces, we quote it in writing before work begins.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Opa-locka

What drives cost on CGI work here is access and detailing more than materials. A second-story arched opening with sculpted stucco returns takes longer than a flat-wall swap, and a standing seam project on a low-slope 1920s roof needs more flashing than a simple gable. A typical CGI impact window or sliding door leak scenario follows a predictable path: a qualified local pro pulls the unit, rebuilds the sill pan with proper slope and flashing, reseals the frame perimeter, and matches the decorative stucco return, then confirms the glazing unit is still sound before recommending replacement.
| Project | Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Standing Seam Metal Roof (per project) | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Frameless Glass Shower Enclosure (within shower budget) | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
The free estimate includes a walk of the openings or roof, a check on existing flashing and substrate, and a written line-item price you can hold us to. Call (888) 255-7411 for an exact quote on your Opa-locka property.
Serving Opa-locka, FL – Our Local Coverage Area
We serve Opa-locka and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Opa-locka
Yes. Any window swap on a domed or arched facade in the historic districts can require a compatibility review before the permit clears, and that review is specific to this city. We plan the scope around it so the install and the facade detailing both pass. Call (888) 255-7411 to talk through your building.
Almost always because the original wood-frame rough opening was never properly flashed when the unit was set. Summer rainbands find that gap and wick water into the block wall. The fix is rebuilding the sill pan with correct slope and flashing, not caulking over the symptom. Call (888) 255-7411 for a written repair quote.
Often, yes, provided the flashing and panel layout respect the roof geometry and the design overlay. Standing seam handles wind uplift and heavy rain well when the seams and grommets are set correctly. We assess the existing structure first, then price it in writing.
Expect the rough opening work to matter more than the unit. The old frame comes out, the opening gets squared and flashed, the new CGI unit goes in, and the interior and exterior returns get finished. Window replacement in these homes typically runs $4,500 – $15,000 depending on count and configuration; call (888) 255-7411 for an exact number.
In many cases, yes. Hairline cracking from sun and moisture can be repaired and re-profiled to match the original geometry if the structure underneath is sound. The skill is in matching the sculpted shape. Call (888) 255-7411 and we’ll assess it on site.
Service Areas Near Opa-locka
We work throughout Opa-locka and the surrounding communities, including North Miami, North Miami Beach, North Bay Village, Sunny Isles Beach, and Aventura. If you’re just north of us, we also cover Pinewood; to the west, Westview. Every one of these areas gets the same written pricing and the same 365-Day Done Right Promise, and you can see the full Opa-locka service area for local detail.
Book Your CGI Service in Opa-locka Today
Whether it’s a leaking CGI impact window, a standing seam panel pulling at the seams, or a stucco return that needs to match the original Moorish Revival profile, we’ll give you a written price before any work starts and a real arrival window. Call (888) 255-7411 to schedule your free estimate in Opa-locka.
Written by the team at Penhallow Remodeling North Miami.












