







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Fence Installation: The North Miami Owner’s Guide
KraftMaid fence installation in North Miami typically runs $4,130 – $10,620 for a full vinyl or composite privacy fence, matched to the KraftMaid series and panel spec already on your property. We match the failing or missing fence sections to your KraftMaid model, quote a written price before we touch a post, and include our 365-Day Done Right Promise. The range holds unless you move to a taller panel, add a gate, or the soil won’t hold a post without concrete footings.
Owners in North Miami usually notice the problem the same way: a gate that drags or swings past the latch, a post that leans after a wet season, panels that have gone chalky and crack along the top rail, or pickets pulling loose from the rail where the fasteners corrode. KraftMaid’s vinyl and composite fencing holds up well in South Florida’s sun and salt air, but the hardware and post-set fail long before the panel stock does. This page covers how to identify your KraftMaid fence line, what fails first in North Miami’s climate, what replacement costs, and where DIY stops and we start.
Which KraftMaid Models This Applies To

KraftMaid’s fence line most commonly seen in North Miami homes is the vinyl privacy and semi-privacy series, along with the composite ranch-rail styles used in older tract developments. The model number is usually printed on a factory label affixed to the inside of a post base or on the underside of a top rail; if the label is gone, measure the panel width (4, 5, 6, or 8 feet are the standard KraftMaid widths) and the picket spacing. That measurement plus the panel height (usually 4, 5, or 6 feet) is normally enough for us to identify the series and the right replacement.
The compatibility gotcha most homeowners miss: KraftMaid’s vinyl rails are matched to a specific post cap and rail-end profile, and swapping in a generic big-box panel kit won’t fit the existing posts without cutting and re-drilling the caps. The picket profile is also proprietary – a flat or dog-ear picket from a different maker won’t sit flush in the KraftMaid rail channel.
The OEM-versus-aftermarket decision comes down to how much fence you’re replacing. For a single damaged panel or one cracked picket, a quality aftermarket vinyl in the right profile and color is often the practical choice and holds up well. For a full run or a section that has to align with the rest of the fence line, OEM KraftMaid parts are the right call – the color and gloss match across the run, and so does the rail geometry. We don’t stock parts and we don’t carry them on a truck; we source the right KraftMaid part for your series, confirm it against your measurements, and bring it to the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Fence Installation Is Failing
- A post that leans or rocks. Post-set failure – usually from soil settling after a wet season or a footing that was set too shallow. North Miami’s high water table and sandy soil make this the single most common failure we see.
- A gate that sags or drags. The hinge-side post or the gate hardware has loosened. Often it’s the screws backing out of the post rather than the gate itself failing.
- Panels gone chalky, faded, or cracked along the top rail. UV degradation from a full day of direct South Florida sun, made worse by salt air near the coast. Vinyl chalks before it cracks, so a white haze on the surface is the early warning.
- Pickets pulling loose from the rail. Fastener corrosion – stainless or coated hardware is what holds, and plain steel screws rust through within a few seasons of salt air and humidity.
- A rail that has bowed or separated at the post. Heat expansion combined with a rail-end that was never locked into the post channel. A moving rail is usually the first visible sign that the panel run itself is out of the post.
In North Miami specifically, the pattern repeats: a fence installed with standard footing depth and steel fasteners will show its first failures in the third or fourth wet season, and a fence with proper concrete footings and stainless hardware holds well past that. The salt air near Biscayne Bay and the beaches speeds up fastener corrosion noticeably compared to inland neighborhoods, so a fence a mile from the water lasts differently than one in North Miami Beach proper.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For KraftMaid-compatible fence installation in North Miami, our installed price range is $4,130 – $10,620. That covers the parts, the labor, and the written guarantee – not a number that gets revised once the crew is on site. Every quote is a written, line-item price before any work starts.
| Scope | Typical installed range |
|---|---|
| Single panel / picket repair | Lower end of the range, with a written quote |
| Short run (one side or one gate section) | $4,130 – $6,500 |
| Full privacy run, standard KraftMaid vinyl or composite | $6,500 – $10,620 |
What drives the number up: panel height (6-foot runs cost more than 4-foot), a new gate, concrete footings where the existing post-set has failed, and hard-to-reach runs along a property line. What keeps it down: reusing sound posts, a single section, or a repair rather than a full replacement. Our technicians have up to 22 years of experience on jobs like this, and every job comes with the 365-Day Done Right Promise – if the work fails inside the guarantee period, we come back and fix it at no charge.
DIY or Call Us?
A homeowner can safely check the basics: measure the existing panel width and height, photograph the factory label if it’s still on the post, and confirm which sections are actually failing versus just dirty. That’s information we need to quote the job.
Where DIY tends to go wrong is setting posts and hanging gates. A fence post relies on a properly set footing, and in North Miami’s sandy, high-water-table soil a shallow or under-poured footing is the exact reason posts lean in the first place. A gate hung off a post that isn’t set right will sag again within a season. And cutting a replacement panel to fit a KraftMaid rail without matching the picket profile leaves a joint that won’t hold.
For a single picket or a quick fix, an owner can handle it. For anything that involves a post, a footing, or a gate, it’s worth having it done right the first time. Call (888) 255-7411 to schedule your free estimate – a real person answers at any hour, and there’s no service-call fee for the estimate.
FAQs

A properly set KraftMaid vinyl or composite fence lasts 15 to 20 years in North Miami, with the panels themselves often outlasting the posts and hardware. The full sun and salt air along the coast shorten fastener life to a few seasons unless stainless hardware was used, so the realistic long-term number depends more on footing and hardware quality than on the panel stock.
Yes, in most cases a single panel, picket, or gate can be repaired or replaced without touching the rest of the run, which we quote at the low end of our $4,130 – $10,620 range. A failing post or a bowed rail usually means that section needs to be rebuilt rather than patched, and we’ll tell you plainly which it is before any work starts.
A single panel or picket replacement is typically a half-day job, and a full run is generally one to two days depending on length, gate work, and whether new footings are needed. We give you a defined arrival window and a written price before the work begins, so there’s no guessing on the day.
We identify your KraftMaid series from the factory label or from the panel width, height, and picket profile, then source the matching OEM part or a quality equivalent in the same profile and color. We don’t claim to stock parts, and we confirm the match against your measurements before the part is ordered.
Penhallow Remodeling North Miami is an independent remodeling company and is not affiliated with KraftMaid. We also install and work with Cambria, Silestone, and Kohler products where the job calls for them.
If your KraftMaid fence has a leaning post, a dragging gate, or panels that have gone chalky, the answer starts with an honest number. Call (888) 255-7411 for a free estimate – we’ll give you a written price before any work starts, show up in the window we promise, and back the work with our 365-Day Done Right Promise. Every technician is background-checked and arrives in uniform, and a real person is on the line whenever you call.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












