







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Driveway & Pavers: The North Miami Owner’s Guide
Penhallow Remodeling North Miami installs and services Moen-compatible driveway and paver systems, and a full paver driveway installation in North Miami typically runs $8,260 – $21,240 installed, with sealing from $295 to $825. Moen’s outdoor and hardscape line pairs paver surfaces with its drainage and connection components, and the failure almost always shows up the same way: water pooling at the edge of the drive after a rain, a joint that sinks a half-inch near the garage apron, or a fitting that weeps at the base of a downspout connection.
Owners usually spot it after a summer storm, when the driveway holds water longer than the street does. That’s the moment to get someone out with a level and a hose, before the settling underneath gets worse. We’re an independent service provider and are not affiliated with Moen, so everything below is written from what we see on North Miami jobs, not from a product brochure.
Key takeaways:
- Installed paver driveways in North Miami: $8,260 – $21,240.
- Sealing runs $295 – $825 and is worth doing before the rainy season, not after.
- Most failures are drainage or substrate, not the paver face itself.
- You get a written price before work starts and a written guarantee when it’s done.
Which Moen Models This Applies To

Moen’s hardscape and outdoor components aren’t one universal part – the model family matters. The most common mismatch we correct is a fitting sized for a 3-inch drainage line installed on a 4-inch run, which works for a season and then fails at the first heavy rain. Before you order anything, find the model number stamped on the component body or printed on the original packaging label, and measure the connection diameter with a tape, not your eye. A 1/8-inch difference in diameter is the difference between a joint that holds and one that weeps.
On the OEM-versus-aftermarket question for Moen specifically: original components match the original substrate depth and drainage geometry, and the aftermarket equivalents often don’t. Where a quality aftermarket part matches the spec exactly, we’ll say so and it’s a fine choice. Where it doesn’t, we won’t install it and then hand you a guarantee on a joint we know will move. We source parts the same way we source the KraftMaid, Cambria and Silestone materials we install indoors: from recognized trade supply lines, matched to the model number, with the spec confirmed before it goes in the ground.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Driveway & Pavers Is Failing
- Water pooling at the driveway edge or garage apron. That’s a drainage slope or fitting issue, not a cosmetic one. Standing water finds the weakest joint and works it loose over a season.
- Sinking or dipping pavers near a connection point. The substrate beneath the connection has washed out. South Florida’s sandy soil and heavy summer rain move base material faster than most of the country, so this happens here faster than it would up north.
- A weeping or dripping joint at a downspout or drainage connection. The seal has failed or the part was mismatched from the start. A weeping joint after a storm means water is sitting where it shouldn’t be.
- Loose or rocking pavers along a run. The bedding layer has shifted, often because the drainage component is letting water through where it shouldn’t. Left alone, the rocking spreads.
- Joint sand washing out after rain. If you’re re-sanding the same stretch every few months, the drainage underneath is the real problem. Sanding over a failing connection just hides it until the next storm.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In North Miami, a paver driveway installation runs $8,260 – $21,240, and the range is driven by square footage, paver type, and how much substrate correction the existing base needs. If we’re replacing a failed connection and restoring the surrounding pavers rather than the whole drive, the work is scoped to that area and priced accordingly. Concrete driveway installation runs $5,310 – $14,160, and driveway sealing runs $295 – $825.
What’s included: the part, matched to your Moen model number, plus labor, substrate correction where the base has washed out, and re-sanding at the repair. You get a written price before any work starts – not a range, not a verbal ballpark – so the number on day one is the number on the invoice. The work carries our 365-Day Done Right Promise in writing. If something we installed fails inside the year, we come back and fix it at no charge, and there’s no service call or re-inspection fee on that return visit.
DIY or Call Us?
You can safely do a few things yourself: find the model number, measure the connection diameter, note where water pools after a storm, and photograph the joint that’s weeping. That information makes the estimate faster and more accurate. Where it goes wrong: pulling and resetting pavers to get at a connection means disturbing the bedding layer and the base, and a base that’s been opened up and closed badly will settle again within a season. Setting a drainage component at the wrong slope is the other common miss – it looks right until the first heavy rain, then the water goes the wrong direction.
On a North Miami driveway, the fix is usually a half-day of work and a full day of curing and settling you shouldn’t drive on. We’ll tell you that honestly rather than rush it. Call (888) 255-7411 to schedule your free estimate.
FAQs

How long should a Moen driveway and paver component last in North Miami? Expect 10 to 15 years from a properly installed component in this climate, shorter if the drainage around it isn’t right. South Florida’s rain load and sandy soil put more stress on the base than most of the country sees, so the substrate matters as much as the part. Call (888) 255-7411 for an exact quote – estimates are free.
Can the failing part be repaired instead of replaced? Sometimes, yes – a joint that’s weeping can often be re-set and re-sealed if the component itself is sound. If the part is cracked or was mismatched from the start, replacement is the honest answer. We’ll tell you which one you’re looking at before any work starts, with a written price on the replacement.
How long does the swap take? A single-component replacement with surrounding paver restoration is typically a half-day of work, plus a day before you drive on it. A larger area that needs substrate correction runs longer. We give you a defined arrival window and a clean job site, so you know what the day looks like before we start.
How do you source the part? We match it to your Moen model number and pull it from recognized trade supply lines, confirming the spec before installation. We don’t carry parts on a truck or stock them locally – the part is ordered for your job and matched to your model. Call (888) 255-7411 and have the model number ready if you can find it – estimates are free.
If your North Miami driveway is holding water or a joint has started weeping, the sooner it’s looked at, the smaller the repair. Call Penhallow Remodeling North Miami at (888) 255-7411 to schedule your free estimate – a live person answers 24/7, and you’ll have a written price in hand before any work begins. Every job is backed by our 365-Day Done Right Promise, in writing.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












