







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The North Miami Owner’s Guide
We install Schluter-compatible kitchen remodeling in North Miami, and whole-kitchen projects typically run $16,520 – $53,100 installed, depending on layout, cabinet line and countertop material. Smaller scopes like a backsplash or island sit well below that lead range. Most North Miami owners find us the same way: a Schluter waterproofing or edge detail that looked perfect at handover starts showing a dark line along the tile, or the grout at a shower-side backsplash begins to crumble within a year. In this climate, the part rarely fails on its own. The bond behind it does.
Which Schluter Models This Applies To
Schluter systems show up in a kitchen in four places: KERDI waterproofing membrane behind wet-area walls and backsplashes, DITRA uncoupling membrane under floor tile, SCHIENE and JOLLY edge profiles at countertop and backsplash terminations, and KERDI-BOARD foam panels for walls that need a flat, waterproof substrate. Identifying what you have takes two minutes. Peel back the edge of a loose tile or look at the exposed backing at a cabinet cutout. KERDI membrane is a fleece-faced sheet; DITRA has a square grid of dovetailed cavities on the underside. Original packaging, where a remodeler left it, carries the printed roll width and the batch number. Roll widths run 3′ 3″ and 5′ for KERDI, which matters because a replacement must match your existing membrane so the overlap seams land where the manufacturer’s instructions require. Penhallow Remodeling North Miami is an independent service provider and is not affiliated with Schluter. On OEM versus aftermarket: Schluter’s own membrane is the only version we install behind a wet wall, because the fleece and the adhesive chemistry are what make the seam watertight. For trim profiles, a quality aftermarket aluminum edge can work, but bring us the profile cross-section and let us check it against the tile thickness first.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
South Florida humidity works on these assemblies differently than a dry climate does, and the symptoms follow from that.
- Grout cracking in a straight line along a backsplash. This usually means the membrane below has debonded from the substrate, so the tile is moving independently of the wall. Hairline at first, wider every season.
- Dark staining or efflorescence at a wet-wall seam. Moisture is getting behind the membrane band and staying there. In North Miami’s summer humidity, a compromised seam does not dry out between rainstorms.
- Hollow sound when you tap a tile. A dull thud instead of a sharp click means the thinset never fully bonded or has since released. Tap a known-good tile first to hear the difference.
- A lifting or rocking edge profile. The profile’s anchoring leg has lost its grip under the tile, common when the substrate was not flat before setting. Left alone, water tracks under the trim.
- Soft or swollen KERDI-BOARD at a cut edge. An unsealed panel edge near a sink or dishwasher wicks moisture and swells. Once it swells, the panel has to come out.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

What owners actually pay to correct Schluter waterproofing and tile work in North Miami kitchens:
| Scope | Installed range |
|---|---|
| Backsplash installation (with membrane correction) | $945 – $2,950 |
| Countertop installation | $2,360 – $7,670 |
| Kitchen island installation | $3,540 – $11,800 |
| Cabinet installation | $4,720 – $15,340 |
| Small kitchen remodel | $10,620 – $23,600 |
| Full kitchen remodel | $16,520 – $53,100 |
Where a failed membrane is behind several courses of tile, the number is driven by how much tile has to come off to reach sound substrate, not by the membrane itself. A tile-and-membrane repair on a limited backsplash run is a small job; a full wall redo after water reached the cabinet boxes is not. We hand you a written price before any work starts, including the membrane, the thinset, and the labor to remove and reset, so the number on day one is the number on the invoice. Every project carries our 365-Day Done Right Promise: if something we installed fails inside the year, we come back and fix it at no charge.
DIY or Call Us?
You can safely pull an exposed edge to identify your membrane, tap tiles for hollow spots, photograph any printed roll labels, and note where the staining starts. That is genuinely useful information to hand us. Where DIY goes wrong is at the seam. KERDI banding needs the right thinset, the right overlap and full embedment, and a seam that looks tight can be pumping water behind the wall a month later. That is not a job to learn on a finished kitchen, and it is not a job where a partial fix saves anything, because the tile has to come up again to redo it. Replace swollen KERDI-BOARD? Same answer. Call us at (888) 255-7411 and describe what you see. A live person answers around the clock, and a free second visit applies if a repair we made fails.
FAQs

Properly installed, Schluter’s membrane system should last the life of the tile assembly, easily 20 years or more. Lifespan in North Miami is decided by the installation, not the sheet: substrate flatness, full thinset embedment, and sealed penetrations. Our technicians have up to 22 years of experience with these assemblies, and the failures we see trace back to a skipped step, not worn-out material.
Sometimes, yes. A single failed seam or a small lifted profile can often be corrected by lifting the affected tiles, removing the compromised band and re-bonding new membrane with the correct overlap. If moisture has reached the cabinet boxes or the panel has swelled, partial repair will not hold and we tell you that plainly. Call (888) 255-7411 for an exact quote; estimates are free.
A localized backsplash or profile correction is usually a one-day job. A wall or floor tear-out to reach sound substrate and re-membrane typically runs three to five working days, plus cure time before grout. We give you a defined arrival window and leave the site cleaner than we found it, which is the standard we work to.
We match the membrane or profile to what is already in your kitchen, then source it through Schluter’s established distribution channel rather than a generic substitute. Where a like-for-like match is not available, we tell you the alternative and the tradeoff before ordering. Countertops and cabinets on the same job come from brands like KraftMaid, Cambria and Silestone, so the whole assembly is covered under one written price and one guarantee.
Kitchen work is a planned project, not an emergency, so we do not promise same-day installs. We do promise a written price up front, a real arrival window, background-checked technicians in uniform, and the 365-Day Done Right Promise in writing. If a Schluter detail in your North Miami kitchen is already showing its age, call Penhallow Remodeling North Miami at (888) 255-7411 for a free estimate. We will tell you what failed, what it takes to correct, and what it costs.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












