







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The North Miami Owner’s Guide
We install, repair and replace Sterling driveway and paver systems for North Miami homeowners, with typical installed projects running $8,260 – $21,240 for a paver driveway and $4,130 – $12,980 for a paver patio. Penhallow Remodeling North Miami is an independent service provider, not affiliated with Sterling, so we’ll tell you plainly when a genuine Sterling replacement makes sense and when a compatible equivalent does the job for less.
Owners usually call us after a stretch of heavy May rain, or after a car tire finally punches through a section of pavers that had been settling for two seasons. The symptom is almost always the same: loose or rocking units, sand washing out of the joints, and a wavy or rutted edge near the street. In North Miami, where the water table sits close to the surface and afternoon storms arrive fast, a driveway with a weak base fails earlier than the same product in drier parts of Florida. By the time you see the first rock, the base underneath has usually already been moving for a year.
Key Takeaways
- Sterling pavers in North Miami typically run $8,260 – $21,240 installed for a full driveway, depending on unit thickness, square footage and base depth.
- Most failures come from the compacted base and joint sand, not the paver itself, so replacing pavers without fixing the base wastes money.
- Click or interlock connections, edge restraints and drainage all need to be checked together before any replacement.
- We install Sterling-compatible and equivalent paver systems from Belgard and Unilock, and every job gets a written price up front and our 365-Day Done Right Promise.
Which Sterling Models This Applies To

Sterling makes pavers in several lines, and the two things that matter for a replacement match are the unit’s face dimensions and its thickness. Most residential driveway pavers are 60mm (roughly 2-3/8 inches) thick, while patios and lower-traffic walkways often use 40mm units. If you mix a 40mm paver into a 60mm driveway field, the surface won’t sit flush and the joint will fail quickly. Measure the installed thickness at an exposed edge, not the face, and match it exactly. Face color and texture are the second issue: Sterling runs multiple color blends, and dye lots vary, so a single-color match from a photo rarely works. Pull up one or two whole units from a corner and use them as your sample.
Identifying your specific Sterling model starts with the original install paperwork if you have it. If not, look for a brand stamp or ink mark on the back or side of a removed paver. On the OEM-versus-aftermarket question: for a driveway that carries a car every day, we recommend genuine Sterling units if your existing pattern is still in production, because matching color and dimensions matters far more than saving a few dollars per square foot on a repair that needs to blend in. For a small repair where the field is already weathered, a compatible equivalent from a brand like Belgard or Unilock is a reasonable choice, and we’ll show you samples side by side so you decide with your eyes, not a catalog photo.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
- Pavers rocking or shifting underfoot. This means the bedding sand has migrated or the base wasn’t compacted in lifts. Once a unit rocks, the joint opens and water gets in faster.
- Sand washing out of the joints after rain. Low spots or a failed edge restraint let stormwater run under the field. North Miami’s summer downpours expose this within one season.
- Ruts or a sunken section near the street or garage. Usually a base that was too thin or laid over organic soil. A proper base is compacted in layers, not dumped in one lift.
- Efflorescence, a white chalky haze that keeps coming back. Mineral salts rising from moisture trapped under the pavers. It can be cleaned, but if it keeps returning the drainage underneath is the real problem.
- Broken or chipped pavers along the driveway edge. The edge restraint has failed and car weights are bearing on unsupported units. Replacing the paver without fixing the restraint just cracks the next one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers break down for North Miami, installed, with the base, bedding sand and joint work included:
- Full paver driveway installation: $8,260 – $21,240
- Paver driveway replacement (remove old, reset base, relay): $5,900 – $16,520
- Concrete driveway installation (if you’re switching materials): $5,310 – $14,160
- Driveway sealing after repairs: $295 – $825
- Paver patio installation: $4,130 – $12,980
The range is driven by square footage, unit thickness, how deep the base needs to go to hit stable soil, and whether the existing edge restraints can be reused. Every homeowner gets a written, line-item price before any work starts. That number on day one is the number on the invoice, and our 365-Day Done Right Promise covers the work in writing: if it fails inside the year, we come back and make it right at no charge.
DIY or Call Us?
A competent homeowner can safely check a few things: lift a loose paver and look at the bedding sand underneath, check for soft or spongy spots by walking the field in dry weather, and see whether the edge restraints are cracked or pulling away from the border. Take photos and note where the low spots are. What goes wrong is the repair itself. Replacing a paver without compacting the base and re-establishing the edge restraint looks fine for a month, then the same rock returns, often spreading the failure to nearby units. North Miami’s shallow water table means a bad base behaves worse than it does inland, so resetting the field correctly matters more here. If you’ve done a small patch and it failed, call us at (888) 255-7411 and we’ll look at it for free.
FAQs

How long do Sterling pavers last in North Miami? A properly installed paver field with a correctly compacted base and good drainage should last 25 to 30 years or more. In North Miami’s humidity and heavy rain, the base and joint sand are what wear out first, not the units, so maintenance is what determines lifespan.
Can it be repaired instead of fully replaced? Often yes. If the failure is localized to a section or a missing edge restraint, a targeted repair that resets the base under that area and matches the color is far cheaper than a full relay. Call (888) 255-7411 and we’ll give you a written number for both options so you can decide.
How long does a paver repair or replacement take? A small section repair usually takes most of a day. A full driveway replacement typically runs three to five working days, depending on square footage, base depth and weather. We give you a defined arrival window and a written schedule before we start.
How do you source the Sterling pavers? We work with recognized trade brands including Belgard and Unilock, and we’ll match your existing Sterling dimension, thickness and color blend, or show you equivalent samples. As an independent service provider we’re not affiliated with Sterling, but we know their lines and what fits alongside them.
We also install and repair systems from KraftMaid, Cambria and Silestone cabinetry and countertops if you’re tackling a larger project while your driveway is being restored.
Ready to stop watching the joints wash out? Call Penhallow Remodeling North Miami at (888) 255-7411 for a free estimate. A live person answers around the clock, every technician who comes to your home is background-checked and uniformed, and you’ll have a written price in hand before a single paver comes up. That’s how we work, and it’s covered in writing on every job.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












