







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Kitchen Remodeling: The North Miami Owner’s Guide
Atlas cabinet and kitchen systems installed in North Miami can be repaired and matched today, and a full kitchen remodel here typically runs $16,520 – $53,100 installed, depending on layout, cabinet line and countertop material. Smaller projects land lower: cabinet installation runs $4,720 – $15,340, countertop installation $2,360 – $7,670, and backsplash work $945 – $2,950. If your Atlas cabinets are sticking, your drawers are sagging, or a door has swollen after a humid summer, you’re in the right place.
Owners usually find out something’s wrong in one of two ways. Either a soft-close drawer stops closing softly and starts banging, or they pull open a base cabinet after a rainy week and the box has swelled enough that the door won’t sit flush. In North Miami, that second one shows up a lot in kitchens without a working exhaust hood, where steam and cooking moisture settle into the cabinet boxes and never quite dry out.
We install and repair kitchen systems that work with Atlas cabinetry, and we do it as an independent service provider. We’re not affiliated with Atlas, and we don’t claim to be. What we do is source compatible parts and hardware, put a written price in front of you before any work starts, and stand behind the result for 365 days.
Key Takeaways
- Atlas-compatible kitchen remodeling in North Miami: $16,520 – $53,100 for a full remodel, with smaller scoped jobs priced lower.
- Soft-close hinges and drawer glides are the first things to fail in Florida humidity, not the cabinet boxes.
- Every job gets a written price before work starts and a written 365-Day Done Right Promise when it’s finished.
- A live person answers our phone 24/7 at (888) 255-7411.
Which Atlas Models This Applies To

Atlas has built cabinetry across several product lines over the years, and the parts don’t cross over cleanly between them. The first thing we do on any Atlas kitchen job in North Miami is get the model number off the inside of a cabinet door or the drawer box. Manufacturers put a label there, usually a sticker or a stamp on the upper inside edge of the door, and it’ll list the series and often the door style. If the label is gone or worn off, we measure: the door overlay (how far the door sits over the face frame), the hinge cup bore (the round hole drilled into the door, most commonly 35mm), and the drawer glide length and mounting pattern.
That measurement step matters because Atlas has used more than one hinge platform, and a 35mm cup with the wrong screw-hole spacing will not seat correctly. It’ll look fine on install and pull loose within a season. This is the compatibility gotcha that trips up a lot of online parts orders: the bore size matches, the hinge doesn’t.
On the OEM-versus-aftermarket question, here’s the honest version. For hinges and glides, a quality aftermarket equivalent from a recognized hardware brand is often as good as or better than the original, and it’s usually easier to get in the exact spec you need. For door fronts and cabinet boxes, matching the original Atlas finish and profile is almost always the right call, because a mismatched door in an otherwise consistent kitchen reads as a repair, not a renovation. We source from recognized trade brands across the board, including KraftMaid, Cambria and Silestone when a project calls for a full cabinet or countertop replacement rather than a part match. Our technicians have up to 22 years of experience reading labels and measuring hinges, and that’s the part of the job that saves you money.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Kitchen Remodeling Is Failing
Atlas cabinetry is built to last, but South Florida gives it a harder life than most of the country. Here’s what failure actually looks like, and what’s usually behind it.
- Doors that won’t stay closed or swing open on their own. The hinge has lost its spring tension or the adjustment screw has backed out. This is a hinge replacement, not a door replacement, in most cases.
- Soft-close drawers that slam. The soft-close mechanism inside the glide has worn out. It’s a small plastic damper inside the drawer glide, and once it fails, the glide needs replacing, not adjusting.
- Drawer boxes that sag or drag on the bottom. Either the glide has failed or the drawer bottom has absorbed moisture and warped. In North Miami, we see this most in kitchens near the coast, where salt air and humidity combine.
- Cabinet boxes swelling at the bottom or around the sink. Water intrusion from a slow leak or persistent steam. The box itself is compromised, and it’s a repair-and-seal job, sometimes a partial cabinet replacement.
- Doors that have delaminated or the finish has bubbled. Heat and humidity working on the door substrate (the core material under the finish). Once the finish lifts, moisture gets in and the door has to be replaced, not refinished.
If you’re seeing more than one of these at once, it’s usually worth a full assessment rather than chasing individual parts. A kitchen remodel in North Miami that addresses the source of moisture, not just the failing hardware, is what keeps the next set of hinges from failing in two years.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what kitchen work in North Miami runs, with the range reflecting layout, cabinet line and countertop material. A full kitchen remodel runs $16,520 – $53,100. A small kitchen remodel runs $10,620 – $23,600. Cabinet installation alone runs $4,720 – $15,340, countertop installation $2,360 – $7,670, backsplash installation $945 – $2,950, and kitchen island installation $3,540 – $11,800.
The range is driven mostly by three things: the cabinet line you choose (a stock line versus a semi-custom line), the countertop material (laminate versus quartz from Cambria or Silestone), and the layout. Moving a sink or a range means plumbing and electrical work, and that’s where a mid-range job becomes a higher-range job.
What that number includes and what it doesn’t: our written price covers labor, materials we supply, and cleanup, and it’s the number on the invoice. It doesn’t cover surprises behind the wall, and we won’t pretend otherwise. If we open a wall and find something that changes the scope, we stop, explain it, and give you a new written price before we touch anything. Every project carries the 365-Day Done Right Promise: if the work fails inside a year, we come back and make it right at no charge. If a repair fails, the return visit is free, no service call fee.
DIY or Call Us?
Some of this you can safely check yourself. You can open a cabinet door and look for the model label, measure the hinge cup with a ruler, and tighten a hinge adjustment screw with a screwdriver. You can also check whether a drawer glide is loose by wiggling it with the drawer pulled out. None of that is dangerous.
Where DIY goes wrong is in the diagnosis and the match. Ordering a hinge that fits the bore but not the screw pattern, or replacing a glide with one that’s a few millimeters off the drawer box, gets you a part that fails again in a season. The other problem is water damage. If the cabinet box has swelled, the fix isn’t a new hinge, it’s addressing what’s letting moisture in. We’ve seen North Miami kitchens where a homeowner replaced the hardware three times before realizing the real problem was a slow leak under the sink.
For a free written estimate on your Atlas kitchen, call Penhallow Remodeling North Miami at (888) 255-7411. A live person answers 24/7, and every technician who comes to your home is background-checked and arrives in uniform. We’ll measure, identify what you actually need, and put the price in writing before any work starts.
FAQs

Quality Atlas cabinetry will typically hold up 15 – 20 years, but soft-close hinges and drawer glides usually need replacing in 5 – 10 years in South Florida, because the humidity accelerates wear on the mechanical parts. The cabinet boxes themselves last longer than the hardware mounted to them, so most “failure” calls we get in North Miami are really hardware calls.
Often, yes. A hinge or glide swap is a repair, not a replacement, and it’s the most common fix we do. If one door is delaminated or a cabinet box has swollen from water damage, that section gets replaced while the rest stays. We’ll tell you honestly which one you’re looking at before you commit to anything.
A hinge or glide replacement on a single cabinet can be done in a matter of minutes once we have the right part. A larger job, like replacing a full run of hardware or a section of cabinetry, typically takes half a day to a couple of days depending on scope. We’ll give you a defined arrival window and a written price before we start.
We identify the Atlas model and the exact hinge or glide spec from the cabinet label or by measuring the bore, the overlay and the mounting pattern, then source a compatible part from a recognized hardware brand or the original spec where it’s still available. We don’t stock parts and we don’t carry them on a truck, so every part is matched to your specific cabinet and ordered for your job. That’s what keeps the replacement from failing in a season.
Call (888) 255-7411 for a free estimate, and we’ll put the price and the guarantee in writing before anything is ordered.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












