







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The North Miami Owner’s Guide
If your Boral window or door has failed, the repair is almost always the part, not the whole unit: a glazing bead, sash balance, hinge, roller, weatherstrip, or closer that North Miami humidity and salt air have quietly worn out. A pro window or door service call for a Boral-compatible part typically runs a few hundred dollars per opening, and full unit replacement in North Miami runs $5,310 to $17,700, or $9,440 to $29,500 for impact-rated windows. Penhallow Remodeling North Miami is an independent service provider, not affiliated with Boral. We install and repair Boral-compatible windows and doors and order the parts to match your model stamp. Most owners find out something failed the same way you probably did: the window starts leaking in a rainstorm, the sash won’t stay up, or the door stops latching clean.
Key Takeaways
- The failed part is usually the sash hardware, seal, or glazing component; the unit or its frame is often still sound.
- Match the part to your Boral window or door series before you order, not after.
- In North Miami, salt air and near-constant humidity shorten the life of seals and hardware well before the glass or frame fails.
- Impact-rated parts are a different spec from standard parts, so get the model number first.
Which Boral Models This Applies To

Boral windows and doors have been built across a range of product lines over the years, and the part you need depends entirely on which one sits in your North Miami home. Boral has made windows and doors under more than one product family, and the part families rarely interchange: a sash balance from one series won’t fit a different frame extrusion, and a door closer for one door system won’t line up with the hardware on another. The reliable path is the unit itself. Every Boral window and door carries a label or etched mark, usually in the head jamb of a window or the top or edge of a door slab, with the model number, series, and dimensional data. Photograph it before you call anyone. If the label is gone, measure the visible glass, the sash width and height, and the frame depth, and note whether the unit is single-hung, casement, sliding, or a hinged or sliding door. That spec sheet narrows the part fast.
Then you face the OEM-versus-aftermarket decision. Original Boral parts are the safest fit and often the only way to get an exact match on older series, but lead times can be long. Quality aftermarket equivalents work well for common hardware (balances, rollers, weatherstrip, hinges) and are usually stocked regionally in South Florida, so they turn around faster. Some Boral product lines are no longer actively supported, and on those the parts network is the aftermarket or a salvage match. That is a real limitation to know up front, not something a technician should figure out after the truck is loaded. Our technicians have up to 22 years of experience, and telling an OEM part from the right aftermarket equivalent is the first conversation we have with most North Miami homeowners.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
- A window that won’t stay up, or drops slowly. The sash balance (the spring or spiral mechanism inside the jamb that counterweights the sash) has lost tension. In North Miami, humidity accelerates the wear on the balance and its anchors, so this shows up years earlier than it would in a drier climate. Left alone, the sash will eventually fall.
- Water coming in during a storm, or a wet interior sill. The weatherstrip, the seal under the sash, or the glazing bead has hardened, shrunk, or pulled loose. Salt air and constant humidity break down rubber and foam seals faster here than in most of the country. Small leaks are worth fixing before they reach the drywall and framing.
- A door that drags, sticks, or won’t latch. A worn hinge, roller, or closer, or a unit that has shifted slightly with the building. On sliding doors the roller assembly is the usual culprit, and the fix is often a roller swap rather than a whole-door job.
- Fogged glass between the panes. The seal on a sealed double-pane unit has failed and moisture has gotten between the panes. The glass unit needs replacing, not the whole window; the frame and hardware usually stay. This is the one failure on this list that’s about glass, not hardware.
- A loose or cracked frame or jamb. Sometimes the unit itself or its flashing has failed. This is the case where replacement, not repair, makes more sense than chasing parts.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For North Miami, here’s the honest range. A single part replacement or hardware repair on a Boral window or door (a sash balance, roller, hinge, weatherstrip run, or glazing bead) typically runs a few hundred dollars per opening, depending on how much trim has to come off. When the whole unit needs to go, window replacement in North Miami runs $5,310 to $17,700, and impact window installation runs $9,440 to $29,500; impact glass is a different spec and a higher price, and it’s the standard in South Florida for good reason. Door and window replacement pricing depends on size, material, glazing, and how much the opening has to be reframed. What drives the number up: impact-rated glass, larger openings, and any rot or structural damage found behind the flashing once it’s opened up. What keeps it down: a sound frame and just a failed part, which is most of what we see.
We give you a written price before any work starts, so the number on day one is the number on the invoice. We don’t do verbal ballparks that change at the door. And every job carries the 365-Day Done Right Promise: if it isn’t done right, we come back and make it right at no charge, and that’s in writing too. The materials we install come from recognized trade brands like Therma-Tru doors, James Hardie trim, and KraftMaid, Cambria, and Silestone across our other work, so the products behind the guarantee are as solid as the promise. Our technicians are background-checked, uniformed, and arrive in the window we gave you. A live person answers the phone 24/7, not a voicemail box.
DIY or Call Us?
Some of this you can safely check yourself, and we’d rather you did. You can photograph the model label, measure the visible glass and frame, note the unit type, and try to identify the part that failed. Cleaning and re-seating a loose screen or wiping down weatherstrip to see if it’s intact is fine. What we’d steer you away from: prying a sash out of a hung window or working the balance mechanism to test it. A window sash is heavy, and when a worn balance lets go, the sash can come down uncontrolled, drop out of the frame, or pinch fingers, and on a second-story North Miami window that’s a real hazard. A failed balance that drops suddenly can also break the glass. Replacing sealed glass units, resetting hinges on a heavy door, and reworking flashing are all jobs where we see home projects turn into a stuck window or a water leak. If you’re not sure, call us at (888) 255-7411 and we’ll talk you through whether it’s a part or a replacement. Estimates are free.
FAQs

How long should a Boral window or door seal and hardware last in North Miami? In this climate, expect the seals and moving hardware to wear out before the frame does. Salt air and year-round humidity break down rubber and foam weatherstrip faster here than in a drier area, and sash balances and door rollers lose their smooth action well before the glass fails. When hardware starts to drag or seal, that’s your signal, not a sign the unit is finished.
Can I repair the Boral window or door instead of replacing it? Yes, often. A failed balance, roller, hinge, closer, or weatherstrip run can be replaced without touching the glass or frame, which is the cheaper and quicker path. Replacement makes more sense when the frame or glazing is what failed, or when fogging between the panes means a sealed unit has gone. Call (888) 255-7411 and we’ll tell you which one you’re looking at, free.
How long does a part swap take? Most single-part repairs are done in one visit, usually under an hour or two per opening, assuming the part is in hand. If the part has to be ordered to match your Boral series, the timeline depends on what’s available in the South Florida parts network and whether it’s OEM or aftermarket. We tell you that before you commit, in writing.
How do you source the right part for my Boral model? We start with the label on the unit: model number, series, and dimensions. If that’s missing, we measure the sash and frame and identify the unit type. From there we match an OEM Boral part or the correct aftermarket equivalent, and we say plainly which one it is and why. If your series is no longer supported, we’ll tell you before you spend money chasing a part that doesn’t exist. Call (888) 255-7411 for a free estimate.
If you have a Boral window or door that’s failing and you’d like a straight answer on whether it’s a part or a replacement, call Penhallow Remodeling North Miami at (888) 255-7411 for a free estimate. We’ll come out, look at the unit, name the part, and put the price in writing before any work starts. That’s The Kingswell Way: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












