







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The North Miami Owner’s Guide
If your CGI paver driveway or walkway is cracking, lifting, or draining toward the house, the fix is a new paver surface and base system, and in North Miami that typically runs $8,260 – $21,240 for a paver driveway installation, with most repairs quoted within days of an on-site measurement. We install CGI-compatible driveway and paver systems using materials from recognized trade brands, and we’re an independent service provider, not affiliated with CGI. Most North Miami owners discover the problem slowly: one paver rocks underfoot, a hairline crack runs across the joint, sunken spots pool water after a summer storm, and the driveway never quite looks the same after that first big rain. You’ll usually notice it first near the street apron or wherever the drive sits in the afternoon sun.
Which CGI Models This Applies To

CGI pavers come in several cast-stone lines with different thicknesses and edge profiles, and matching the right one means reading what’s already on your property rather than guessing from a website. Check three things before you do anything else.
- Measure thickness at an exposed edge. Standard residential paver systems are often 2 3/8 inches, but driveway-rated profiles can run thicker, and a mismatched replacement paver won’t sit flush with the rest of your field.
- Match the color and finish. CGI’s cast-stone look comes from a pigment process, and dye lots shift from batch to batch. If your pavers are more than a few years old, a new batch of the same “color” can read noticeably different in Florida sun.
- Check the joint sand and base spec. CGI systems are typically installed over a compacted aggregate base with a specific joint sand. A replacement that skips the proper base depth will fail within one wet season in North Miami.
On OEM versus aftermarket: for cast-stone pavers, the “OEM” question mostly matters for color and edge match, not mechanical fit. A quality aftermarket paver from a recognized brand can perform as well as original CGI product, but testing side by side in daylight before you buy is worth the trip.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
These are the five things we see most often in North Miami, and what’s usually underneath each one.
- Pavers rocking underfoot. The base has lost compaction, often from water getting under the surface through failed joint sand. In North Miami’s wet season, one summer of that is enough to loosen an entire run.
- Sunken or uneven sections. Poor drainage is carrying soil away from the base, or the original base was compacted too shallow. Left alone, sunken spots spread outward from the low point.
- Hairline cracks across the paver face. Cast-stone pavers crack from point loading or an unsupported base. South Florida’s summer heat cycling expands and contracts the surface, and small cracks widen season after season.
- Joint sand washing out. If the joints look bare or sandy after a rain, the sand isn’t holding. Bare joints let water into the base, which is the root of most failures we get called about.
- Staining or efflorescence (the white haze on cast stone). Sometimes it’s surface residue, sometimes it’s water movement through the slab. If efflorescence keeps coming back after a wash, the moisture path needs addressing, not just the top of the paver.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what pavers and driveways actually cost in North Miami right now. Every number is a written price before work starts, not a range that changes on demo day.
- Paver driveway installation: $8,260 – $21,240
- Concrete driveway installation: $5,310 – $14,160
- Asphalt driveway paving: $4,130 – $10,620
- Driveway replacement: $5,900 – $16,520
- Driveway sealing: $295 – $825
- Paver patio installation: $4,130 – $12,980
What pushes the driveway number up or down: square footage, base depth required after tear-out, drainage work (French drains, regrading, a swale toward the street), and whether the existing pavers can be salvaged for the field. Tear-out and disposal of the old surface is quoted separately so you can see it. Every job carries our written guarantee, and if something fails inside the 365-day Done Right Promise, we come back and make it right at no charge.
DIY or Call Us?
Some things are worth checking yourself before you call. A driveway paver replacement is different: the surface is the easy part, and the base is where homeowner work goes wrong.
What you can safely do: walk the driveway after a rain and mark the low spots with chalk, note which pavers rock, photograph any cracks, and pull one loose paver at the edge to check thickness. Do not pry up a large section of paver or dig out the base yourself, and do not try to re-lay a field over a base you haven’t verified, because a re-laid field over a bad base fails within one wet season in North Miami, and that’s a costlier repair than the original job.
If the paver is lifting at the street apron, or the joint sand won’t hold after a re-sand, that’s base work. Call (888) 255-7411 and we’ll look at it. Estimates are free, the price is written before we start, and a live person answers 24/7.
FAQs

A well-installed cast-stone paver driveway typically holds up for 20 to 30 years in South Florida sun and rain, but the base and joint sand need attention every 3 to 5 years and resealing every 2 to 3 years. The paver itself usually outlasts the installation around it, and that’s why base prep and drainage matter more than the surface here. Call (888) 255-7411 for an exact quote on your driveway.
Often, yes, and repair is the right call if the failure is small and localized, typically spot re-sanding and re-setting isolated pavers. If the base is failing across a whole run, a partial repair just buys you a season or two before it spreads. We’ll tell you which one you’re looking at, in writing, with the price for each.
A typical residential paver driveway in North Miami takes 3 to 6 days from tear-out to final joint sand, depending on square footage, base depth, and drainage work. We give you a defined arrival window and keep the site clean each day. If you need a written number before you decide, call (888) 255-7411.
We measure thickness and profile from your existing field, match the color against the closest available batch from recognized manufacturers, and show you the sample in daylight before ordering. Cast-stone dye lots shift from batch to batch, so an exact color match on older pavers won’t always be possible, but on a full driveway replacement we order the entire field from one lot so the color reads consistent. Call (888) 255-7411 to schedule a free estimate.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












