







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Windows & Doors: The North Miami Owner’s Guide
We install and repair CWS-compatible windows and doors for homeowners across North Miami, and the most common jobs are single-window replacements (typically $5,310 to $17,700 installed) and full impact window installations that run $9,440 to $29,500 depending on opening count and glass package. This page is about the part that failed, and how to match it to your exact CWS model so you don’t pay for the wrong piece twice. We’re an independent service provider, not affiliated with CWS.
Owners usually find the failure one of two ways. A window that won’t latch all the way on a humid afternoon, so they push it and hear the lock strike slide past the keeper. Or a door sash that drifted a quarter inch and started catching on the frame in one corner – which means the roller or hinge already wore out and the misalignment is the symptom, not the cause. Either way, the fix is matched to the part, not eyeballed.
Which CWS Models This Applies To

CWS built a broad range of aluminum-framed impact and non-impact windows and doors over the last two decades, and the part you need almost never crosses over between product lines. The first thing to do is find the etched or stamped label on the inside of the frame – it’s usually on the top or side jamb – and write down the model series, the glass package code (single-hung vs. horizontal slider matters), and the rough opening dimensions. If the label is gone, measure the glass and frame separately and note the lock or roller style before you order anything.
Here’s the compatibility gotcha that trips people up: CWS used more than one roller and lock profile across what looks like the same window family, so a “CWS slider roller” from a parts site can be off by a few millimeters in track width and won’t ride the channel correctly. That’s why we measure the existing hardware before ordering, not order by brand name alone.
OEM versus aftermarket is a real decision with CWS. OEM parts are the exact fit, and for lock and hinge assemblies we lean that direction because the tolerance on impact-rated openings is tight – a milled-mate lock that’s off by a hair won’t hold the weather seal, and in North Miami that means wind-driven rain finding its way in. For rollers, weather seal, and wear strips, quality aftermarket equivalents from recognized American hardware makers work well when the profile matches, and they cost meaningfully less. We tell you which side of that line each part sits on before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Windows & Doors Is Failing
- The window won’t latch flush. The keepers or the lock strike wore down, or the sash drifted off its track. If it won’t seat by summer, your impact rating on that opening is compromised, and that’s not a cosmetic issue in North Miami.
- The door drags or scrapes the threshold at one corner. A worn bottom roller or a hinge that lost tension has let the sash drop a fraction. Left alone, the corner seal opens and water gets behind the frame plate.
- The lock feels loose or the key spins. Internal lock mechanism failure. On CWS impact doors this is a security and weather issue at once, because the same mechanism pulls the door into the frame seal.
- You see daylight through the frame when the window is shut. The weather seal or gasket has flattened from UV exposure and heat cycling. South Florida’s sun attacks these seals faster than most of the country, so a seal that lasted ten years up north may need replacement here in five to seven.
- The glass fogs from the inside. That’s a seal-unit failure, not a frame problem, and it can’t be repaired – the insulated glass has to be replaced as a unit. We measure the exact glass size and the spacer thickness before ordering.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In North Miami, a single window replacement runs $5,310 to $17,700 installed, and a full impact window installation runs $9,440 to $29,500 depending on the number of openings and glass package. Small, targeted hardware fixes and seal replacements sit at the low end of those ranges; a one-panel slider hardware replacement is a fraction of a tear-out and install.
What moves the number: labor access (second-story or tight lot lines cost more), whether the frame is being cut in or full-frame replaced, the glass package on impact ratings, and how many parts you actually need versus how many a shop tells you are “likely” bad. Every homeowner gets a written price before any work starts, so the number on day one is the number on the invoice.
The parts-plus-labor line is itemized, not bundled. Repairs carry a written guarantee, and our 365-Day Done Right Promise means if the work fails inside the year, we come back and fix it at no charge – and if a repair ever fails, your return visit is free, no service call fee.
DIY or Call Us?
You can safely check the label, measure the glass and frame, test the lock by hand, and confirm the sash isn’t binding on debris in the track. That’s the smart first step, and it saves time on the phone.
Where DIY goes wrong with CWS windows and doors: prying a locked sash, forcing a dragging door to lift by hand, or trying to re-tension a hinge assembly without knowing which spring is under load. High-tension window and door hardware can snap back hard enough to break a knuckle, and an impact-rated frame that’s pried out of square has to be re-glazed or replaced – doubling your cost. On a second-story window, a dropped frame is also a fall risk. The honest line: measure and diagnose yourself, but let us pull, match, and set the part. Call (888) 255-7411 and we’ll price the closest job you need.
FAQs

How long do CWS windows and doors last in North Miami? Ten to twenty years for the frame and hardware, and five to seven years for weather seals and glass units under South Florida’s UV and heat cycling. The frames outlast the seals by a wide margin, so most “failed” windows only need hardware or a glass unit.
Can it be repaired instead of replaced? Usually yes. If the frame is square and the glass isn’t fogged or cracked, a hardware or seal repair brings the window back to working order. Replacement only makes sense when the frame itself is bent, rusted through, or the glass seal has failed.
How long does the swap take? Hardware and seal repairs on one or two openings are a half-day job. A single glass unit replacement is generally the same visit once the part is sourced. Full tear-and-replace windows are a scheduled job, and we give you a real arrival window, not an all-day range.
How do you source the right CWS part? We pull the model and glass code from your frame label, measure the existing hardware, and match the profile before we order. We don’t in-ventory or stock CWS parts and don’t carry them on a truck – so you get the exact fit, not a guess. Call (888) 255-7411 for a free estimate on your repair.
Contact us. Call Penhallow Remodeling North Miami at (888) 255-7411 for a free estimate. Background-checked, uniformed technicians, a written price before any work starts, and a 365-Day Done Right Promise on the job. We also service KraftMaid cabinets, Cambria and Silestone countertops, and other trade-brand products if your project runs past the windows and doors.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












