







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Bathroom Remodeling: The North Miami Owner’s Guide
Therma-Tru doesn’t manufacture bathroom parts – you’re thinking of their doors and entry systems – but when a North Miami bathroom renovation includes a Therma-Tru door, we handle the full job: door, frame, threshold, glass, and the wet-area work around it. A full bathroom remodel in North Miami runs $10,620 – $33,040 installed, with door-specific work usually at the lower end of that band. We don’t promise same-day service on a bath project – a bathroom takes days, not hours, and anyone who says otherwise isn’t being straight with you.
Owners typically discover a problem one of three ways: a bathroom door that sticks or won’t catch its latch through a wet season; a threshold that’s pulling away from the tile; or a door panel that’s fogged, swollen, or rusting at the bottom rail. In each case, the door is telling you something about moisture, settling, or a bad original install – and that’s what we’d come look at.
Which Therma-Tru Models This Applies To

Therma-Tru’s entry and patio door lines (Smooth-Star, Fiber-Classic, and the Profiles collection) all show up in Florida bathrooms where owners wanted a fiberglass or steel exterior door instead of standard interior hollow-core. Interior bathroom doors, though, aren’t a Therma-Tru product – their line is exterior entry, patio, and storm doors. So if the failing door is between your bedroom and bath, you’re likely dealing with a different manufacturer, and we can help you identify it.
Here’s the compatibility gotcha most folks miss: Therma-Tru door slabs and frames are matched by series and hand (left/right swing), and the rough-opening dimensions listed on the unit’s edge label are the slab size, not the opening. Measure the rough opening – width, height, and wall thickness – before you shop. If you find a sticker or stamp inside the jamb, photograph it; the model number and series are printed there. For fiberglass units, the OEM vs. aftermarket decision usually lands on OEM hinge and lock prep – aftermarket retrofits often don’t line up with Therma-Tru’s factory boring.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Bathroom Remodeling Is Failing
- The door sticks through summer and frees up in winter. This is North Miami’s humidity cycle swelling a wood or composite core behind a fiberglass skin. It usually means the top or bottom seal has failed, letting moisture into the slab.
- The bottom rail is rusting or bubbling. Moisture is getting past the threshold or sweep. On steel units this means the base has started to fail; on fiberglass, the bottom rail is absorbing water the skin should have kept out.
- The threshold pulls away from tile. A settling slab, a poor original pan, or missing sealant at the door-to-floor junction. Left alone, this is where North Miami’s afternoon storms get in.
- The glass is fogged between panes. The insulated glass unit (IGU) seal has failed. It’s a glass replacement, not a door replacement, but it must be matched to the door’s glazing channel.
- The latch won’t catch or the deadbolt misaligns. Hinge screws have pulled from the jamb, or the frame has shifted. Common after a bathroom renovation when the door was removed and reinstalled without re-shimming.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a full bathroom remodel in North Miami, our installed range is $10,620 – $33,040. A small bathroom remodel, if the door is the only major item, runs $5,900 – $14,160. What moves the number:
- Door and frame replacement vs. reusing the existing unit with new hardware.
- Insulated glass replacement if the seal has failed – a glass cost, not a whole-door cost.
- Threshold and pan work – re-flashing the door-to-floor junction and re-setting tile.
- Substrate repair if moisture has gotten into the substrate (the moisture-resistant layer behind your tile) or the door frame.
Every job gets a written price before we start – the number on day one is the number on the invoice. Parts and labor are itemized so you can see exactly what the door costs and what the installation costs. The work falls under our 365-Day Done Right Promise; if something fails inside that window, we come back and make it right at no charge.
DIY or Call Us?
You can safely: measure the rough opening, photograph the jamb label, check that the door swings smoothly, and test the threshold with a moisture meter (a $15 tool at any hardware store). You can also re-set a squeaky hinge screw with a golf tee or dowel – that’s a real fix and won’t hurt anything.
Where it goes wrong: re-flashing a door at a wet floor, replacing an IGU without matching the glazing channel, and re-shimming a frame after tile is set. Those are the calls that turn a $400 fix into a $3,000 job. Call (888) 255-7411 for a free estimate – we’ll tell you what’s worth fixing and what’s worth replacing.
FAQs

A properly sealed fiberglass door should last 20+ years; in North Miami’s salt air and humidity, we see failure closer to 12-15 years if the bottom seal or threshold was never maintained. Sun exposure and coastal air accelerate the wear.
Usually yes. Fogged glass, sticking hinges, a misaligned latch, or a rusting sweep are all repairable without replacing the door. Full slab replacement only becomes necessary when the bottom rail has lost structural integrity from water damage. Call (888) 255-7411 for a free estimate – we’ll tell you which one you’re looking at.
A door replacement – removing the old unit, fitting the new slab and frame, re-flashing the threshold – is typically one day. If tile or substrate needs repair, plan on two to three days for a bathroom door alone, longer if the full bath is in scope.
We match your door’s series and model number from the jamb label, then source the correct slab, frame, or IGU from Therma-Tru’s distributor network. We don’t stock parts on a truck and we don’t guess at compatibility – the lead time is usually one to two weeks, which we put in writing before you commit. Penhallow Remodeling North Miami is an independent service provider, not affiliated with Therma-Tru.
If you’re in North Miami and a bathroom door is failing, or you’re planning a bathroom remodel that includes a new exterior door, we’d like to help. We serve North Miami and nearby areas, and we work with brands like KraftMaid, Cambria, and Silestone alongside Therma-Tru when the job calls for it. Call (888) 255-7411 for a free estimate – a live person answers around the clock.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












