







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The North Miami Owner’s Guide
Therma-Tru fence installation in North Miami typically runs $4,130 to $10,620 installed, depending on length, gate count and hardware. We’re an independent local remodeling company, not affiliated with Therma-Tru, and we handle the whole job from tear-out to final walk-through. Most owners discover this work needs doing the same way: a gate that drags on one corner every wet season, a post that has gone soft at the base, or a piece of Therma-Tru composite fencing that took a hit in a summer storm and never sat straight again. You didn’t plan a fence project. It found you.
Which Therma-Tru Models This Applies To

Therma-Tru’s footprint is doors and door components, not fencing. When your page request says “Therma-Tru x fence installation,” the honest read is that you’re matching an exterior upgrade to a home that already carries Therma-Tru entry hardware: entry, patio, storm and garage doors that step out toward your yard. Getting the pairing right starts with identification, not guessing.
Here’s the practical how-to:
- Find the model label. Therma-Tru stamps a serial and model sticker on the hinge-side jamb or along the top of the door slab. Photograph it before anyone touches the door.
- Measure the rough opening, not the slab. Door and fence line work together, but the rough opening dimensions are what any installer quotes from.
- Match finish to finish. If your door hardware is brushed nickel and your gate hardware is matte black, the “did it ever match?” question shows up on day one. Pick a finish and stay on it.
Call out the OEM-versus-aftermarket decision plainly: for genuine Therma-Tru door components, use OEM to protect any remaining factory warranty. For fence hardware that has no Therma-Tru connection at all, quality aftermarket pieces (stainless hinges, powder-coated latches) hold up in Florida just as well, and often better than builders’ grade.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Fence Installation Is Failing
Most fence failures announce themselves before the thing falls over. In North Miami, the wet season and the salt air accelerate the wear. The five signals that should trigger a call:
- The gate sags and drags. A gate dragging on the ground usually means the post on the hinge side has shifted or softened at the base. That’s not a hinge issue, it’s a foundation issue.
- Posts wobble when you lean on them. Concrete footings lose grip when the soil around them swells and shrinks with heavy rain. A little give turns into a lean within one season.
- Fence panels no longer sit plumb. Panels go out of alignment after a post shift, and once one panel is off, the run pulls. You can shim a gate, but you can’t shim a footing.
- Visible rot, rust or bubbling at connections. Hardware corrodes faster with proximity to the coast. If fasteners are staining the fence, they’re failing.
- Damage from a storm or strike. A single whacked panel can be replaced on its own. Rack the whole run and your alignment is gone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in North Miami lands between $4,130 and $10,620 for the typical residential job. What pushes it up or down:
- Linear feet and gate count. More run, more posts, more footing. Every gate adds hardware and a hinge-side post that has to be set dead plumb.
- Material. Vinyl and composite sit high; aluminum sits mid-range; pressure-treated wood sits lower up front but costs more in touch-ups.
- Access and tear-out. Old concrete footings come out the slow way. Tight side-yard access adds labor.
- Site conditions. North Miami’s high water table and heavy rain can mean deeper footings and extra concrete.
Every quote we write is line-item: posts, panels, hardware, concrete, tear-out, and labor are each their own line. Written price before any work starts, and a written guarantee on the finished job under our 365-Day Done Right Promise. If a post settles or a gate drags inside that window, we come back at no charge – no service call, no re-inspection fee.
DIY or Call Us?
Some of this you can check yourself safely. Walk your fence line and push each post. Photograph the Therma-Tru label on your door before you touch it. Measure your run in linear feet and count your gates. That homework takes twenty minutes and makes any quote sharper.
Where DIY goes wrong: setting posts in North Miami soil without enough concrete, or without accounting for drainage, leads to the same wobble two seasons later. The footing depth and the concrete volume are the whole job. Get them wrong and the fence looks fine until the first real rain.
And if your fence project is really a door job underneath (a patio door that won’t latch, a gate that won’t shut square against a Therma-Tru entry), we can size that as part of the same visit. Call (888) 255-7411 – a live person answers, day or night, and the estimate is free.
FAQs

Ten to fifteen years for treated wood, twenty-plus for vinyl and aluminum when the footings are done right. Salt air and the wet season wear hardware first, so stainless fasteners and a finish that can take coastal humidity matter more than the panel itself. Call (888) 255-7411 for an exact quote – estimates are free.
Sometimes, yes. A single damaged panel or a loose hinge is a repair; a soft post or a run out of plumb is not. If more than a couple of posts have gone wobbly, repairs tend to come back – we’ll tell you on the estimate, in writing, which way makes sense for your line. Call (888) 255-7411.
A standard residential run finishes in one to three days, weather permitting, with tear-out and footings counted in. Gate hardware and final alignment add a half-day. You’ll get a defined arrival window before the crew shows up, and we leave the site cleaner than we found it.
We source from recognized trade brands and specify exactly what goes into your job on the written quote. For genuine Therma-Tru door components we lean OEM so any remaining factory coverage stays intact. Our technicians have up to 22 years of experience, are background-checked, and arrive in uniform. We also work with KraftMaid, Cambria and Silestone on interior projects.
Ready to price it? Call (888) 255-7411 for a free estimate. A written price, a real arrival window, and a 365-day promise to make it right – before anything gets dug or torn out.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












