







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Bathroom Remodeling: The North Miami Owner’s Guide
Barrette is a brand most people meet at the outside of the house, so let’s clear this up first: Barrette doesn’t make bathroom fixtures. Barrette (the Barrette Outdoor Living line) makes vinyl and aluminum fence systems, railing, and outdoor structures – not tubs, tile or vanities. If you’re standing in a North Miami bathroom holding a part stamped Barrette, it’s almost certainly a fencing or railing component, or a piece a previous contractor reused as trim or blocking. Either way, this page is for the owner who has a failed or failing Barrette-branded piece near a bathroom project and needs it matched, priced and reinstalled correctly.
Full bathroom remodeling in North Miami typically runs $10,620 – $33,040 installed, and that’s where most Barrette confusion starts. The failed part itself is usually a small-ticket item. It’s the moisture damage around it that turns a twenty-dollar fix into a real remodel. And to be direct: Penhallow Remodeling North Miami is an independent service provider – we are not affiliated with Barrette, and we don’t sell Barrette parts. We install, repair and remodel around them under a written scope and price.
Key Takeaways
- Barrette makes outdoor fencing, railing and structure products – not bathroom fixtures. Match the part by profile and measurement, not by the bathroom’s existing finish.
- Bathroom remodeling projects in North Miami run $10,620 – $33,040; small bathroom remodels run $5,900 – $14,160.
- Vinyl and aluminum Barrette components hold up well outdoors in South Florida, but indoors they trap moisture behind bathroom walls, which is what accelerates failure.
- Every job gets a written price before work starts and our 365-Day Done Right Promise in writing.
Which Barrette Models This Applies To

Barrette Outdoor Living is a large brand with many sub-lines. On the fencing side, homeowners most often encounter the Impression Rail Express, Fairway, and outdoor railing kits. Barrette railing sections come in standard post spacing and cap/rail profile sizes that have shifted across manufacture years, so the single most common compatibility failure is buying a rail section that’s a fraction off the cap you already have. That’s a 1/8-inch mismatch that looks fine in the box and won’t seat on the post.
How to identify the right part:
- Read the label on the original piece. Barrette rail and post caps carry a part number format like “7304xxxx” (series + size + finish). Photograph the full label before it’s removed.
- Measure, don’t eyeball. Post width, rail thickness and cap inner diameter need to the nearest 1/16 of an inch.
- Note the manufacture decade. Barrette changed the profile on several lines over the years, and older North Miami installations frequently have a discontinued profile.
OEM vs. aftermarket: Barrette OEM caps and rail kits cost more but guarantee fit on the same series. A quality aftermarket rail cap costs less and often fits, but only if the measurement is exact. We can source either. Materials we install on bathroom work come from recognized trade brands like KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures – we don’t carry Barrette parts on hand, and we won’t pretend we do.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Bathroom Remodeling Is Failing
Every one of these symptoms starts with moisture movement, not with the product itself. Barrette makes good components; the failure is almost always where the piece meets the wall.
- Soft or crumbling substrate behind the piece. Water pushing through caulk joints reaches the drywall or cement board behind it, and the board goes soft before the Barrette piece shows anything. That’s the first thing to inspect.
- Caulk line that reopens within weeks. A joint that cracks open repeatedly means the two surfaces are moving independently – usually a loose anchor or a piece that was never seated correctly on the post.
- Rust or pitting at the fastener heads. Interior bathroom humidity attacks standard fasteners quickly. Galvanized or stainless hardware should be used; if yours isn’t, that’s the culprit.
- Visible bowing or profile distortion. In South Florida, the humidity inside a bathroom can run past 70% for weeks. Aluminum and vinyl components that were designed for exterior exposure behave differently indoors, and the profile can distort over time.
- Musty smell near a wall where a piece was reused. That’s an indication of hidden water damage behind the Barrette trim piece, and it should be investigated before any cosmetic fix.
If you’re seeing more than two of these, the answer is likely a small bathroom remodel rather than a part swap.
Replacement Cost & What’s Included

We give you a written price before work starts. Not a range, not a verbal ballpark. Here’s what North Miami homeowners actually spend:
| Job | Installed Range |
|---|---|
| Small bathroom remodel (part swap plus moisture repair) | $5,900 – $14,160 |
| Bathroom remodel, full scope | $10,620 – $33,040 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
| Walk-in shower installation | $5,310 – $14,160 |
What drives the number up or down: whether the substrate is dry behind the failed piece or shows rot; whether we’re matching a discontinued Barrette profile or replacing the whole trim line; and whether the surrounding tile has to be reset. Replacing a cap and rail section is a small job. Replacing the same piece after the wall behind it has been wet for two years is a small remodel.
Every job – part swap or full remodel – carries our 365-Day Done Right Promise in writing. If something we installed fails inside that window, we come back and fix it at no charge. That’s the Kingswell standard: say the price before the work, show up in the window we gave, and leave it cleaner than we found it.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely inspect before committing to anything. Photograph the part and the label. Measure the post and rail to the nearest 1/16. Check the caulk joint at the wall and the fastener heads. Those steps tell you what’s failed and give us a head start on the quote.
Where DIY goes wrong on this job is moisture. Replacing a Barrette rail cap on top of a wet substrate is the most common mistake we see in North Miami – the cap goes back on and looks right, and three months later the joint opens and the wall behind it goes soft. The other failure point is the fastening. A standard drywall screw into gyp board will hold for one rainy season, not five. And if the part came off near a shower or tub, the waterproofing behind that wall needs to be confirmed before anything goes back.
We’re a general contractor, not a parts retailer, so we’ll tell you if the fix is genuinely a twenty-minute swap and nothing more. Call (888) 255-7411 to schedule a free estimate. A live person answers, not a voicemail prompt.
FAQs

A Barrette exterior-grade rail cap or post cap can last 15 to 20 years outdoors, but in North Miami’s bathroom humidity – where humidity can hold above 70% for weeks at a stretch – we regularly see the caulk line fail at the three to five-year mark and the substrate behind it start to soften at six to eight. The product itself isn’t the weak point; the seal at the wall is. Call (888) 255-7411 for an exact quote on inspection and repair – estimates are free.
Often yes. If the Barrette piece itself is intact and the anchor or caulk joint is the failure, we re-seat and re-seal it – that’s usually a small job under $500 in labor-plus-material. If the profile is cracked or distorted, it’s a replacement. If the wall behind it is soft, the fix moves up into small bathroom remodel territory at $5,900 – $14,160. Call (888) 255-7411 for an exact quote – estimates are free.
A single-piece replacement – rail cap, post cap, or trim section – is a one-visit job, typically two to four hours including re-sealing and clean-up. If we find moisture damage behind it, we won’t cover it with new caulk and call it done: we’ll scope the repair in writing and get your approval before proceeding. You’ll never get a ballooned invoice after demo day. Call (888) 255-7411 – estimates are free.
We don’t stock parts and we don’t carry them on a truck. We source from the manufacturer when the part is current, and from authorized suppliers or matched aftermarket equivalents when it’s not. If your North Miami piece is a discontinued Barrette profile from a prior installation, we’ll tell you plainly and quote the closest compatible match before you commit. Call (888) 255-7411 for an exact quote – estimates are free.
Get Your Written Price
If a Barrette-branded piece in your North Miami bathroom has failed or you’re planning a bathroom remodel and want the price in writing before work starts, call Penhallow Remodeling North Miami at (888) 255-7411 for a free estimate. We’ve been operating to the Kingswell standard since 2004, our technicians have up to 22 years of experience, and every job is covered by the 365-Day Done Right Promise. You’ll get a written number you can hold us to, background-checked and uniformed technicians on every visit, and a live person on the phone 24/7. Free call, free estimate, no pressure.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












