







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Home Additions & ADU: The North Miami Owner’s Guide
We build Barrette-compatible home additions and ADUs for North Miami homeowners, and comparable projects here typically run $53,100 – $153,400 for an addition and $106,200 – $259,600 for a full ADU. Whether you’re adding a wing for aging parents or a rentable unit out back, the numbers depend on footprint, foundation type, and how much of the work touches your existing roofline. Owners usually start this conversation one of two ways: either a Barrette package they bought is sitting on a pallet and they need footing, framing, and a real plan, or a decades-old addition has started pulling away from the main house and they want to know what failed. Both are calls we take every week in North Miami.
Which Barrette Models This Applies To

Barrette makes structural connectors, framing hardware, and post-and-beam components that show up throughout additions and ADUs, so “Barrette” on a project like this usually means the structural hardware tying your new walls into the old ones, not a single finished product. That matters for compatibility: the connector line matters more than any one part number. Find the stamp on the strap, hanger, or post base, then match by gauge and load rating, not just by the shape. An older hanger that’s been sitting in Florida heat and humidity for 20 years may not meet current uplift ratings even if it looks identical to a new one.
Here’s the OEM-versus-aftermarket decision that trips people up: Barrette’s own replacement hardware is the safe match if you’re repairing a specific connection, but a qualified aftermarket equivalent rated for the same load and code requirement is a legitimate option and often more available on short notice. What you shouldn’t do is substitute a lighter-gauge piece because it’s in stock at the nearest big-box store in North Miami. We’re an independent service provider, not affiliated with Barrette, so our job is matching the right spec, not selling you the largest box. We bring the right connector for the job, sourced to your inspected requirement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Home Additions & ADU Is Failing
Structural hardware under an addition doesn’t fail overnight. It tells you for months. Here’s what we see across North Miami:
- Separation at the joint where the addition meets the main house. A widening gap in the drywall or stucco usually points to a failing ledger connection or a hanger that’s pulled loose. Don’t caulk over it and move on; it gets worse with each rainy season.
- Bouncing or sagging floors in the new space. That’s a joist hanger or beam seat that wasn’t sized for the load it’s carrying. It’s the single most common call we get on older North Miami additions.
- Rust streaks or white corrosion powder on visible straps and plates. South Florida’s humidity and salt air chew through untreated or under-spec hardware faster than the rest of the country. Flash rust on the surface is normal; heavy pitting means replacement.
- Doors and windows in the addition that won’t close square anymore. The frame has shifted, which means a connection somewhere has let go. This one compounds fast if you ignore it.
- Water stains at the top of an ADU wall near the roof tie-in. A loose hurricane strap or a corroded purlin connection lets water sneak past the flashing. The strap is cheap; the rot behind it isn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a home addition in North Miami, the market range is $53,100 – $153,400. A full ADU runs $106,200 – $259,600, and a garage-to-living-space conversion sits at $35,400 – $94,400. Those ranges sound wide because they are: an 800-square-foot addition built on a slab with a simple gable roof lands near the bottom, while a second-story bump-out with structural reinforcement lands near the top. Repairs to Barrette structural hardware specifically are usually far smaller line items inside those budgets, since you’re paying for the connector plus the labor to open a wall and re-tie it.
What we don’t do is quote over the phone and hit you with a change order at demo. Every North Miami project gets a written price before any work starts, itemized so you can see the parts, the labor, and the contingency line. That written price is backed by the 365-Day Done Right Promise: if a connection we made fails inside a year, we come back and fix it at no charge. One free second visit if a repair fails, no service call. We install to code and pull the permits your addition or ADU needs to pass inspection.
DIY or Call Us?
You can inspect your own home safely. Look for gaps, rust streaks, and sagging floors, and photograph what you find. Where DIY gets dangerous is at the wall itself. Structural work supporting a roof or a second story involves load-bearing framing, and pulling a connector to “see if it’s bad” can shift weight you can’t see. That’s a job for a trained, background-checked technician who knows how to shore before they cut. We arrive when we said we would, in uniform, and we tell you what’s actually failing and what it’ll cost before anyone touches a stud. If a repair didn’t hold, we’re back under the guarantee.
Call (888) 255-7411 for a free estimate on your North Miami addition or ADU. A live person answers any hour; we’ll come look, explain the option, and put a number in writing.
FAQs

Expect 15 to 25 years on properly installed, correctly coated hardware, but salt air and humidity in North Miami can cut that to 10 to 15 years if the connector was under-spec or never coated for coastal use. Inspect visible straps and plates once a year, ideally before hurricane season starts.
Sometimes, yes. A single loose hanger can often be re-tied and re-nailed without replacing the surrounding structure. But once the ledger or beam has pulled away from the main house, you’re usually replacing the connector and reinforcing the joint, so call (888) 255-7411 and get it looked at before the repair grows.
A single exposed connector takes an afternoon. A structural re-tie behind a finished wall takes one to three days, since we have to open, shore, repair, and close it back up. We give you the exact window in writing before we start, so you’re not guessing how long the wall stays open.
We match by model line, gauge, and load rating from the stamp on your existing hardware. Since we’re an independent service provider and not a Barrette dealer, we source to the spec your addition actually requires and show you that in the written quote, so you can verify what’s going in before we install it.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












