







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Home Additions & ADU: The North Miami Owner’s Guide
Quick answer: A Belgard hardscape-led home addition or ADU in North Miami typically runs $53,100 – $153,400 for an addition and $106,200 – $259,600 for a detached ADU, because these projects combine structural framing with Belgard paver and block work at the base. If you’ve landed here because a paver, wall block, or cap on your Belgard install has cracked, settled, or gone loose, you’re in the right place – we’ll help you match the exact part and price the fix. Penhallow Remodeling North Miami is an independent service provider and is not affiliated with Belgard.
Most North Miami owners find a Belgard failure the same way: a hairline crack running across a paver in the walkway, a corner of a retaining wall block that’s started to rock when you step on it, or a cap that has popped free after a rainy season. The cause is almost always underneath – a base that didn’t drain, or a joint that took on water. Keep reading; we’ll tell you what we see and what it costs to set right.
Key Takeaways
- Failed Belgard pavers and wall blocks are usually a base-and-drainage problem, not a product defect.
- Most single-part swaps are a one-visit job; larger re-grades span a couple of days.
- We give you a written price before work starts and back the install with the 365-Day Done Right Promise.
Which Belgard Models This Applies To

Belgard’s residential line splits into a few families you’ll want to sort out before you order anything. The paver lines – things like the popular large-format and tumbled profiles – carry the name and nominal dimensions on the original packaging or the underside of a sample the installer left behind. The wall block lines are identified by face profile, cap style, and coursing depth, and those dimensions matter: a block from a different series will not interlock cleanly with an existing run, so matching the series is the whole game.
The compatibility gotcha most owners miss: Belgard retires and reformulates colors and profiles over the years. If your install is more than a few seasons old, the exact shade may no longer be in production. An honest match means pulling a reference paver or block and comparing under daylight, not matching off a photo. On the OEM-versus-aftermarket call, we’ll tell you plainly – if a current Belgard part matches, that’s the cleanest route; if the series is discontinued, we’ll walk you through a compatible replacement and where the seam will show.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Home Additions & ADU Is Failing
These are the failure patterns we see most in North Miami, and what’s really behind each one.
- A crack running across a paver face. Usually a point load over a void – the base beneath lost compaction or a subgrade pocket shifted.
- Blocks that rock when you step near them. The interlock has opened and the joint is letting water in, so the block is moving on a wet base.
- Loose or popped caps on walls or piers. Adhesive has failed after sun and rain cycles; the cap needs to come off, the bed cleaned, and the bond redone correctly.
- Sunken sections or pooling water along a walkway. Drainage has changed – either a grade dropped out or a joint started holding water instead of shedding it.
- Efflorescence or fading beyond normal age. A white bloom is moisture moving through the block; heavy color loss can point to the wrong sealer or too much sun exposure on a low-grade finish.
In North Miami specifically, the wet season is where these show up. Water sits in joints during heavy rain, and if the base isn’t moving water out, freeze-free Florida weather actually works against you in a different way – the constant cycle of soak-and-dry softens the base before it ever cracks a paver face.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a Belgard-led hardscape repair or addition runs in North Miami, priced with labor and materials together:
| Project | Installed Price Range |
|---|---|
| Home Addition (Belgard hardscape base) | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
| Paver Patio Installation | $4,130 – $12,980 |
| Paver Driveway Installation | $8,260 – $21,240 |
What drives the range: the size of the footprint, whether the base has to be excavated and re-compacted, and whether you’re matching an existing Belgard series or replacing a discontinued one. Every job gets a written, line-item price before work starts – not a ballpark, not a verbal number that changes at demo day. The install is covered by the 365-Day Done Right Promise: if it fails inside the year, we come back and make it right at no charge, and a failed repair visit is free of service-call or re-inspection fees.
DIY or Call Us?
There’s a real split here. You can safely lift a loose cap, photograph the failed block or paver for a match, and note where water pools after a storm. That’s useful information and we’ll use it. What you can’t safely or cleanly do yourself is re-set a structural wall course or re-compact a base – a wall block that goes back in on a wet or uncompacted bed will fail again in the same season, and a heavy wall run that’s lost its interlock is a load you don’t want to move alone.
If you have a single loose cap on a decorative pier, that’s a small fix. If a wall is leaning, a walkway is migrating, or pavers are shifting across a path, that’s a base problem and it needs the right hands. Call (888) 255-7411 for a free estimate and we’ll tell you which one you’re looking at.
FAQs

How long does a Belgard paver or block last in North Miami? A correctly installed Belgard paver or wall block holds up 20 – 30 years or more in South Florida; what fails first is almost never the block itself but the base and joints beneath it. Call (888) 255-7411 for an exact quote on a repair – estimates are free.
Can the failed part be repaired instead of replaced? Often yes. A single cracked paver or a popped cap can usually be lifted, re-bedded, and re-bonded without touching the rest of the install. If the base has failed across a run, replacement is the honest answer and we’ll price both.
How long does the swap take? A single-part swap is a one-visit job, usually under half a day. A section re-grade or a wall repair runs a day or more depending on drainage work. We give you a real arrival window and hold to it.
How do you source the matching Belgard part? We pull the reference sample and match the series and color under daylight, then order through trade channels. If the exact series is discontinued, we’ll show you the closest compatible match and tell you where the seam will show before you commit.
Belgard pavers and block aren’t the only brand we work with on additions and ADUs – we also install KraftMaid cabinetry, Cambria quartz, and Silestone surfaces when a project calls for them, sourced from recognized trade brands so the guarantee sits on solid products.
Call (888) 255-7411 for a free estimate. A live person answers any hour, you get a written price before work starts, and our background-checked, uniformed technicians arrive in the window we give you. That’s The Kingswell Way: say the price before the work, show up when we said, and leave the place cleaner than we found it. Our technicians have up to 22 years of experience, and every job is backed in writing.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












