







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The North Miami Owner’s Guide
Bathroom remodeling built around Unilock materials in North Miami typically runs $10,620 to $33,040 installed, depending on how much of the wet area you’re changing and which Unilock surface or system you’re working with. Most projects are planned work rather than emergency calls, so we schedule them on a written estimate and a defined arrival window instead of promising a same-day crew that shows up before you’ve had a chance to think. The range reflects real material choices, not a bait number.
Owners usually land here by noticing a symptom first: grout that keeps darkening no matter how many times it’s sealed, a floor that flexes near the toilet flange, or joint compound at tile-to-wall transitions that has started to powder after a humid summer. In North Miami, the discovery almost always follows a rainy season, not a cold snap.
Which Unilock Models This Applies To

To be direct about who we are: Penhallow Remodeling North Miami is an independent remodeling company, not affiliated with Unilock. We don’t sell the material or carry a parts inventory. What we do is install and repair around the specific product you already own or have selected, and we match our work to what’s physically in the room.
Unilock is best known in this market for paving and wall systems, so a “Unilock bathroom” is usually one of two things: a bathroom floor or shower surround finished in Unilock thin-set compatible tile or paver-derived slab, or a wet-area system where Unilock material is used as a decorative face on a floated and waterproofed substrate. The identifying step is the same either way. Look at the back of a tile or the edge of a slab for a stamp or batch mark – most Unilock products carry a model or finish name there, and the finish name is what you need. Measure the piece precisely; nominal thickness of the material matters far more than the box label when a replacement has to sit flush with what’s already down.
The OEM-versus-aftermarket call for Unilock-specific work is usually made on thickness and color-lot match, not on some proprietary chemistry. A close-match tile from a different mill at the correct thickness and a sampled color lot will outlast a true OEM piece you can’t source within your existing dye lot, because color mismatch on a partial floor reads worse every year as it fades unevenly in Florida sun.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Bathroom Remodeling Is Failing
- Grout that darkens, crumbles, or turns sandy at the edges. Water is getting behind the tile, and in a North Miami bathroom that’s often the shower pan or the wall-to-floor transition rather than the field grout itself.
- Flex or hollow sound when you step near the toilet flange or the tub apron. The substrate under the tile has lost bond, usually from a slow leak, and hollow tapping is the earliest reliable warning you get.
- Efflorescence – the white, powdery bloom – creeping out of the joints. Moisture is traveling through the cement board substrate and drying at the surface, which is a symptom of a failed moisture barrier, not a cleaning problem.
- Tile or slab lifting at a doorway threshold. The transition piece is holding moisture against the edge of the floor system, and the bond under the adjacent tiles is being compromised along with it.
- A recurring crack in the same joint after every repair. Something under the tile is moving – a slab crack, a framing deflection, or a shower pan that was never sloped properly – and no surface fix stays put until that movement is addressed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For North Miami, our bathroom remodeling projects come in at $10,620 to $33,040 installed. A smaller scope – a shower tile replacement without moving plumbing – lands in the $5,900 to $14,160 range, and a walk-in shower installation runs $5,310 to $14,160. Here’s what actually drives the number.
- Wet-area waterproofing: properly pre-sloped, membrane-sealed, cement board substrate is a line item, and skipping it is why so many baths fail inside five years.
- Material quantity and finish: full Unilock-material floor versus decorative face only on a floated substrate.
- Plumbing relocation: moving the drain for a walk-in or curbless layout adds real cost, so it’s priced separately, never guessed.
- Fixture brand: Kohler and Moen fixture upgrades price differently than a stock builder-grade set.
Every Penhallow project gets a written price before work starts. The number on day one is the number on the invoice, and the work comes with our 365-Day Done Right Promise – if the install fails inside the first year, we come back and make it right at no charge.
DIY or Call Us?
Here’s the honest split. You can safely check the back of a tile for its batch mark, tap along the floor to listen for hollow spots, measure thickness at an edge, and photograph the damage before anyone arrives. What you should not do is pull a shower pan or break out tile at the wall-to-floor junction yourself; that work puts you into the waterproofing and the plumbing trim, and a mistake there lets water into the framing where you can’t see it. In a North Miami bathroom, that hidden moisture is the difference between a $600 fix and a $14,000 rebuild.
If you’re facing a failed shower or a floor that’s flexing, call us at (888) 255-7411. A live person answers 24/7, the estimate is free, and the number is written before we start.
FAQs

How long does a Unilock-compatible bathroom remodel last in North Miami? A correctly waterproofed install with a pre-sloped pan and a sealed moisture barrier typically lasts 20 to 30 years before it needs replacement, while a pan that was never sloped properly can fail inside 5 to 8 years in Florida’s humidity. The lifespan is decided by the substrate work, not by the surface material. Call (888) 255-7411 for an exact quote – estimates are free.
Can I repair instead of replace? Yes, if the damage is confined to grout, a few tiles, or the shower curb joint and the substrate hasn’t hollowed out. Once you hear flex or hollow tapping near the flange or pan, repair becomes a stopgap and replacement is the honest answer. Call (888) 255-7411 and we’ll tell you which one you’re actually facing.
How long does the swap take? A like-for-like tile or slab replacement without moving plumbing usually runs 3 to 5 working days; a full bathroom remodel in North Miami runs 2 to 4 weeks. We confirm the timeline in writing with the estimate and hold to the arrival window we give you. Call (888) 255-7411 to schedule.
How do you source the material? We don’t carry parts. We identify the finish and batch from your existing material, source a matched replacement through our trade supply channel, and bring a physical sample to your home before buying a single box. We also work alongside KraftMaid, Cambria, and Silestone selections where a remodel includes cabinetry and countertops. Call (888) 255-7411 for a free on-site estimate.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












