







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Fence Installation: The North Miami Owner’s Guide
Ameristar fence installation in North Miami typically runs $4,130 to $10,620 for a residential run, depending on linear footage, the series you choose, and whether we’re setting new posts or tying into sound existing ones. Our technicians have up to 22 years of experience with Ameristar’s aluminum and steel ornamental lines and can usually give you a firm written price after a free on-site measure.
Most North Miami homeowners don’t start out shopping for a fence. They start with the symptom: a gate that drags on the pavers after a wet season, a post that wobbles when the wind pushes through, or a section of powder coat that’s bubbling near the ground line. You notice it on the way to the mailbox, not in a catalog. That’s the moment this page is written for.
Key Takeaways
- Installed Ameristar fence runs in North Miami generally land between $4,130 and $10,620.
- Powder coat, post footings, and gate hardware are the three things that fail first in South Florida.
- We’ll always give you a written price before any work starts and a written guarantee on the finished job.
Which Ameristar Products This Applies To

Ameristar is an ornamental fence manufacturer, not a single product line. The brand is best known for its aluminum residential styles (the Montage and Transmark series among them) and its steel and aluminum commercial-grade runs. Each series has its own post sizing, rail profile, and picket spacing, and the hardware doesn’t swap between them cleanly. If you’re replacing a section or a gate, we need to match the exact series, not just the color. A 2-inch post and a 2.5-inch post look identical from the street and take completely different brackets.
To identify what you have, check three things: the post cap (some Ameristar caps are stamped on the underside), the width of the rails measured across the face, and the picket spacing measured center-to-center. If you have the original paperwork from the installer, that’s gold. If not, a photo of the gate hinge and a tape measure gets us most of the way there.
On the OEM-versus-aftermarket question: Ameristar’s own parts are the safest match for anything structural like hinges, latches, and post brackets, because the tolerances are built into the system. For cosmetic pieces like post caps or pickets, a quality aftermarket equivalent in a matching finish is often indistinguishable and less expensive. We’ll tell you which is which on your quote so you can decide.
We’re an independent service provider. We’re not affiliated with Ameristar, and we don’t claim to be. We install and install-to-match the brand, sourcing parts through recognized trade suppliers. When a job involves cabinetry, countertops, or siding alongside fence work, we also handle KraftMaid, Cambria, and Silestone, though fence work is its own scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Fence Installation Is Failing
Aluminum and steel fences don’t rot, but they do fail in specific ways, especially in North Miami’s salt air, summer rain, and hurricane-season wind loads. Here’s what to watch for and what each symptom usually means:
- Powder coat bubbling or flaking near the ground line. Moisture is getting under the coating, usually from a footing that sits below the neighboring grade or a sprinkler head hitting the same spot daily. Once the coating breaks, the aluminum underneath starts to pit.
- A post that moves when you push it. The concrete footing has cracked, shrunk away from the post, or was undersized for the wind load. In North Miami, footings need to be deeper and wider than what you’d spec in a calmer market, and a wobbling post is the warning sign.
- A gate that sags or drags on the ground. Gate hardware (hinges, the latch, the self-closing mechanism if you have one) wears faster than the fence itself. A sagging gate is usually a hinge wearing out or a post that’s settling, not a bent frame.
- Rust-colored streaking on steel sections. Steel ornamental fence is galvanized, but a scratch or a bad weld point lets salt air in. North Miami steel fences near the coast streak faster than inland ones, and it starts at the weld, not the middle of a rail.
- Loose pickets or rattling rails. Fasteners back out over years of thermal expansion and wind vibration. A rattle you hear on a windy day is a fastener that’s already walking out.
Replacement Cost & What’s Included

For a North Miami Ameristar fence installation, plan on $4,130 to $10,620 for a residential run. That range includes the fence material, the footings set to local wind-load requirements, hardware, and labor. What moves the number:
- Linear footage is the biggest driver. The range above covers a typical residential perimeter; longer runs or more complex layouts push toward the top.
- Series and gauge. A heavier-gauge commercial style, or a taller run, costs more per foot than a standard residential height.
- Gate count and hardware. Each gate adds hinges, a latch, and often a self-closer, and those are the parts that cost the most per piece.
- Site conditions. Rocky soil, concrete to cut through, or tight access all add labor.
You’ll get a written, line-item price before any work starts: so much for material, so much for setting posts, so much for the gate. The number on day one is the number on the invoice. The finished job carries our 365-Day Done Right Promise, in writing, and if the repair or install fails inside that window, we come back and fix it at no charge. Same visit if it’s a repair; free return visit if it fails. That’s the deal.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest split. You can safely check a few things yourself: measure your post spacing, photograph the gate hinge and latch, and note where the powder coat is failing. A tape measure and a phone camera are your only tools for that, and it tells us exactly what series you have before we arrive.
Where DIY goes wrong on an Ameristar install is the footings and the gate hang. Setting a post plumb in a footing sized for South Florida wind loads is the part that fails first, and a gate that’s hung a quarter-inch off will drag within a year. Digging and pouring footings around underground utilities (and North Miami yards have more of them than most) is another place a weekend project turns into a phone call. None of it is dangerous like working on a live electrical panel, but it’s the kind of job where a small error compounds into a redo.
If you’d rather have it done once, call (888) 255-7411. Free estimate, written price, real arrival window. A live person answers the phone 24/7, and every technician who shows up is background-checked and in uniform.
FAQs

A well-installed aluminum Ameristar fence typically lasts 20 to 30 years in North Miami’s climate, but the powder coat and the footings are the real limiting factors, not the metal. Salt air and daily irrigation spray age the coating faster than inland conditions, and an undersized footing will fail long before the fence does. Call (888) 255-7411 for a free evaluation of what you have.
Often yes, especially if it’s one section, a gate hinge, or a single post. If the frame is sound and the fasteners or hardware are the only failure, a targeted repair is the right call and costs far less than a full install. If the powder coat has failed across multiple sections or several footings are loose, replacing the run is usually the honest answer. We’ll tell you which on a free estimate; call (888) 255-7411.
A typical residential Ameristar run in North Miami takes one to three days depending on footage, gate count, and whether we’re setting all new footings or tying into existing ones. Concrete curing adds time before gates go on. You’ll get a written schedule with your written price, and we hold to the arrival window we give you. Call (888) 255-7411 to schedule your free estimate.
We source through recognized trade suppliers and match your existing series, post size, and finish before ordering, so the new section fits the old one. We confirm the series with you in writing on the quote, and if a matching part can’t be sourced, we tell you that up front rather than substituting and hoping. Call (888) 255-7411 for an exact quote, estimates are free.
Get Your Ameristar Fence Priced in Writing
If your Ameristar fence is failing or you’re ready to install a new run in North Miami, the next step is simple. Call (888) 255-7411 for a free estimate. We’ll measure on site, confirm the series, and hand you a written, line-item price before any work starts, backed by the 365-Day Done Right Promise and a written guarantee on the job. A live person answers 24/7, so you’re not leaving a message and waiting.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












