







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Fence Installation: The North Miami Owner’s Guide
If you’re pricing a Barrette fence installation in North Miami, plan on $4,130 to $10,620 installed for a typical residential run, depending on linear footage, series, and gate count. That covers removal of the old fence, post setting in our coral-rock-and-sand soil, panels, caps, and cleanup. We schedule site visits by appointment and give you a written price before anything is ordered.
Most owners don’t call us because they want a new fence. They call because a Barrette panel has started to lean after a storm, a post has rusted through at the ground line, or a gate has dropped and won’t latch. The failure usually traces back to the original install, not the product. In North Miami, salt air and seasonal downpours find every shortcut in a fence line within a few years.
Key Takeaways
- Installed Barrette fence runs $4,130 – $10,620 in North Miami.
- Barrette is an aluminum and vinyl system, so it doesn’t rot or feed termites, but post footings and gate hardware are where installs fail.
- We’re an independent contractor, not affiliated with Barrette, and we source genuine Barrette components through trade suppliers.
- You get a written price up front and our 365-Day Done Right Promise on the workmanship.
Which Barrette Models This Applies To

Barrette makes its fence lines under a few families: ActiveYards (vinyl), Raleigh and Grandview aluminum lines, and various privacy, picket, and ranch-rail styles within each. That matters when you’re matching a component, because a post cap, gate hinge, or bottom rail from one series usually won’t fit another. The right way to identify your system is to pull the spec from three places: the original install contract if you have it, the embossed branding on the inside of a post or rail, and a tape measure on the rail profile (vinyl rails commonly sit around 1-1/2 to 2 inches tall; aluminum rails run thinner).
Then comes the OEM-or-equivalent decision. Original Barrette parts match the profile, color, and hardware spacing exactly, which matters on a partial run where the new section has to disappear into the old. Quality aftermarket equivalents can work for hidden parts like post caps and screws, but we stick to genuine Barrette for visible components and anything under load. Where a part is discontinued, we tell you honestly and quote the closest current match.
We install Barrette, and we also service KraftMaid, Cambria, and Silestone on the interior side of our business.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Fence Installation Is Failing
Fence problems show up in the panels and in the ground, and the two are often separate fixes. Here’s what to look for.
- Leaning or wobbly posts. The post has shifted in its footing, usually because the original concrete didn’t set deep enough for North Miami’s sandy, high-water-table soil. The panel above is fine; the base isn’t.
- Rust bleeding at the ground line. On aluminum gates and posts, moisture trapped at the bottom trap creates a rust line you can see from the street. Left alone, it thins the metal and weakens a gate hinge point.
- Sagging gate that won’t latch. The hinge or the gate frame has bent under repeated use and heat cycling. Most gate failures are hardware, not the panel or the post.
- Cracked vinyl rails or posts. Sun exposure and seasonal temperature swings make vinyl brittle over time; a crack usually starts at a fastener hole or where a rail meets a post.
- Panels pulling loose in wind. Missing or corroded fasteners let panels rack and lift in a storm. This is the easiest fix if caught early and a bigger one once a section has blown out.
One reality worth naming: a Barrette fence in South Florida generally holds its looks for 15 to 20 years on vinyl and considerably longer on aluminum, provided the footings and hardware are right. A failing fence at year five is almost always an install issue, not a product issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A Barrette fence installation in North Miami lands between $4,130 and $10,620 installed. Where you fall on that range comes down to linear footage, material (vinyl versus aluminum), number of gates, and whether old fencing has to come out first. A short gate-and-panel repair on an otherwise sound fence is far less than a full run, and we quote it that way rather than pushing a replacement you don’t need.
Every quote breaks the number into materials and labor, so you can see what the parts cost against the weather and wind exposure that drives the installation work here. You get the written price before work starts, and our 365-Day Done Right Promise covers the workmanship: if it fails inside a year, we come back and make it right at no charge.
DIY or Call Us?
You can safely do a few things yourself: walk the line and note which posts lean, measure the run and gate openings, check that gate hardware is tight, and read the branding on a post to identify your series. That information helps us quote faster.
Where DIY goes wrong is at the post setting and gate alignment. A Barrette post set in an undersized footing in our sandy soil will lean again within a season, and a gate rehung without the right frame alignment drops twice as fast. Setting posts at depth through coral rock and getting the concrete right is the part that decides whether the fence lasts. If you’d rather not gamble on it, call (888) 255-7411 and we’ll give you a written price.
FAQs

Expect 15 to 20 years from vinyl Barrette fencing and longer from aluminum in normal North Miami conditions. Lifespan depends far more on footing depth and hardware condition than on the panel material itself.
Often, yes. Leaning posts, sagging gates, and loose panels are the most common repairs, and they usually cost a fraction of a new run. We inspect first and quote the smallest fix that actually holds. Call (888) 255-7411 for a written price.
A typical residential run takes one to three days depending on footage, gates, and footing conditions. We give you a defined arrival window and a clean job site each day.
We source genuine Barrette components through trade suppliers matched to your series and color. We’re an independent contractor, not affiliated with Barrette, and if a part is discontinued we tell you straight and quote the closest current match.
Whether you’re replacing a single failing section or running a full new fence, the goal is the same: a written price before we start, and a fence that’s still standing straight a decade out. Call (888) 255-7411 for a free estimate on your Barrette fence installation in North Miami. A real person answers around the clock.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












