







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The North Miami Owner’s Guide
CGI fence installation in North Miami typically runs $4,130 – $10,620 installed, and that range covers the post setting, the panels, the hardware and haul-away. Most jobs run two to four days once materials land. We connect North Miami homeowners with independent, background-checked installers who carry the written price up front, so the number you approve is the number on the invoice. We’re an independent service provider and are not affiliated with CGI.
Owners usually find the problem the same way. A gate drags on the driveway and won’t latch in the afternoon heat. A post has gone soft at the base, or leaning panels pull their anchors out of the ground after a wet season. On aluminum runs, the powder coat starts to chalk and pit along the bottom rail, where standing water sits after a tropical downpour. In North Miami, the salt air off the bay and the afternoon storms do the damage faster than most people expect. Once a post moves, the whole line moves with it.
Which CGI Models This Applies To

CGI makes several fence lines, and the parts aren’t interchangeable across them. The common residential lines are the aluminum ornamental series, the pool-code aluminum series (often specified for North Miami properties inside a pool barrier), and the vinyl privacy lines. Each uses its own post size, rail profile and bracket pattern. A post cap or gate hinge from one series usually won’t seat on another.
The fastest way to identify your model is a combination of three things. Measure the post (common sizes run from 2-inch square to 4-inch square) and measure the panel width and height. Then find the sticker or stamp on the inside face of a gate post or the underside of the top rail. That stamp carries the series designation, which is what any supplier will ask for first. If the stamp is gone, a photo of the bracket and the post profile usually gets it matched.
On the OEM-versus-aftermarket question: for CGI aluminum, the OEM bracket and finish-matched glass or picket sections are worth the premium because the powder coat is color-matched to the rest of the run, and a mismatch shows within a year in the Florida sun. For gate hardware and anchor bolts, quality aftermarket equivalents are often equally good and less expensive. We source parts to the spec, not to a brand name.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Fence Installation Is Failing
- Posts leaning or soft at the base. North Miami’s high water table and sandy soil let water sit around the post footing. The cause is usually inadequate concrete depth or a set that never cured properly.
- Rust or bubbling along the bottom rail. Salt air and standing water attack the powder coat from the inside out. Once the coating lifts, corrosion has already started.
- Gates that sag and drag. A hinge wears or a gate post settles, and the gate drops out of square. It happens faster on a gate hung on a single post without a proper brace.
- Loose anchors and rattling panels. Anchor bolts pull out when the footing is too shallow or the soil has shifted. You’ll hear panels rattle in a storm.
- Chalky, faded finish. Sun exposure breaks down the coating over several years. Fading is cosmetic at first but signals the coating is thinning.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Most CGI fence installation work in North Miami falls in that $4,130 – $10,620 range. What drives the number: run length and height, whether you’re replacing the line or extending it, the gate count, and how much existing footing has to be cut out and re-poured. Line-item pricing looks like this:
| Item | Typical range |
|---|---|
| Post removal and footing | $410 – $1,240 |
| Panels and rails | $1,650 – $4,540 |
| Posts and caps | $820 – $2,060 |
| Gate and hardware | $620 – $1,650 |
| Labor and haul-away | $630 – $1,130 |
You get a written price before any work starts, so the line items above are what you see on the quote. The 365-Day Done Right Promise covers the installation. If a post settles or a gate fails inside that year, we come back and fix it at no charge.
DIY or Call Us?
You can safely check a fence yourself. Measure the post and panel, read the model stamp, take a few photos of the base and any bracket, and note which spots are soft. That’s the homework that makes a quote accurate.
Where DIY goes wrong is the physical part. Setting a post in sandy North Miami soil that stays wet through the wet season takes the right footing depth and the right concrete mix. Get it wrong and the post leans again within a season, and you’ve paid twice. Gates are worse. A gate hung out of square pulls apart its own hinges. And cutting or re-anchoring aluminum needs the right bit and torque, or the frame cracks. This isn’t dangerous the way a live wire is, but it fails quietly. Call us at (888) 255-7411 and we’ll price it straight.
FAQs

How long does a CGI fence last in North Miami?
A properly installed aluminum CGI fence runs 15 – 20 years, and vinyl runs 10 – 15, though the salt air near the bay shortens that on the hardware and bottom rail. Regular washing helps the finish last.
Can it be repaired instead of replaced?
Often, yes. A single gate, a leaning post, or a section of damaged panels can be swapped without replacing the whole run. If three or more posts are soft, replacement is usually the better spend.
How long does the swap take?
Most single-section repairs are done in a day; a full run takes two to four days once parts arrive. Installation is scheduled, not same-day, so you get a real arrival window and a crew that shows when it says it will.
How do you source the CGI part?
We match the series and finish to your existing run, and we quote both OEM and quality aftermarket options where both are available. You see the part cost on the written price before we order anything.
Ready for a number you can hold us to? Call (888) 255-7411 for a free estimate. A live person answers around the clock.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












