







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The North Miami Owner’s Guide
We install CGI-compatible windows and doors across North Miami, with full window replacement typically running $5,310 – $17,700 and impact window installation running $9,440 – $29,500 depending on size, glazing and opening count. We can usually get an estimator out to you within a few days, and written pricing before any work starts. Penhallow Remodeling is an independent service provider and is not affiliated with CGI.
Most North Miami owners don’t go looking for a window or door problem. It finds them. A sliding glass door starts dragging on the track sometime in late summer, or a window that sealed fine in January whistles in a northeast wind by August. Sometimes it’s simpler: the glass fogs between the panes and no amount of wiping fixes it, or the lock won’t catch and the door won’t sit flush no matter how hard you push. CGI products are common in South Florida homes, and the parts that fail first are predictable once you know what you’re looking at.
Key Takeaways
- Window replacement in North Miami: $5,310 – $17,700. Impact-rated units: $9,440 – $29,500.
- We match parts and units to your actual CGI series, not a generic “fits most” claim.
- Written price before work starts, and the 365-Day Done Right Promise on every job.
- Background-checked, uniformed technicians on every visit.
Which CGI Models This Applies To

CGI is a South Florida manufacturer, which matters here. Their product lines are built around Miami-Dade and Broward code requirements, so the model on your home is likely a code-rated assembly, not a builder-grade unit pulled from a national catalog. That’s good news for durability and less good news when a part fails, because the replacement has to match the rating, not just the measurements.
How to identify what you’ve got:
- The label. CGI units usually carry a manufacturer label on the frame or in the jamb channel, with a model or series designation and a Miami-Dade NOA (Notice of Acceptance) number. The NOA is the part that matters most, since it ties the unit to a specific approved assembly.
- Measurements. Rough opening width, height and depth, plus glass thickness. A quarter-inch discrepancy in frame depth is the difference between a clean fit and a shimmed mess.
- The glass stamp. Tempered, laminated or insulated, and the impact rating if it’s there.
On the OEM-versus-aftermarket question, our honest answer for CGI specifically: match the assembly, not just the brand. A generic impact window won’t carry the NOA your CGI unit does, and in North Miami that can matter at inspection or resale. Where a compatible aftermarket part exists and holds the correct rating, we’ll tell you and price both. Where it doesn’t, we say so.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
Five symptoms we see regularly in North Miami, and what’s actually behind them:
- Fogging or condensation between the panes. The seal on the insulated glass unit (IGU) has failed and moisture is inside the assembly. No cleaning helps, and the unit has to be replaced rather than resealed in place.
- A sliding door that drags or jumps the track. Usually worn rollers or a track that’s collected salt and grit. Sometimes it’s the frame shifting in the opening, which is a bigger fix than a roller swap.
- Wind or water getting past the frame in a storm. Failed weatherstripping, a tired sweep, or sealant that’s given up after a few Florida summers. This one moves from annoying to damaging fast.
- The lock won’t catch or the door won’t sit flush. A worn multipoint mechanism or a strike that’s drifted out of alignment. Impact doors carry heavier hardware than standard units, and it wears accordingly.
- Visible corrosion at the hardware or fasteners. Salt air is relentless in North Miami. Pitting at hinges, handles and screws is the early warning that the hardware is on its way out, even if the frame and glass are fine.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what our window and door work runs in North Miami, installed:
| Work | Installed range |
|---|---|
| Window replacement | $5,310 – $17,700 |
| Impact window installation | $9,440 – $29,500 |
Where you land inside those ranges comes down to four things: the number and size of openings, glass type (impact-rated laminated costs more than standard insulated), frame material, and whether the opening needs any reframing or stucco repair once the old unit comes out. A single fogged IGU swapped into an existing frame sits at the low end. A full set of impact-rated units across a two-story home sits at the top.
Every job gets the same structure: a written price before work starts, one number that doesn’t move once we’re on site, and a written guarantee on the work. If something we installed fails, the 365-Day Done Right Promise has us back to fix it at no charge. We source materials from recognized trade brands, including Therma-Tru doors, alongside our cabinetry and countertop lines like KraftMaid, Cambria and Silestone on whole-home projects.
DIY or Call Us?
Some of this is genuinely safe to check yourself. Feel for drafts around the sash with the back of your hand. Look at the lock and strike to see whether they line up. Clear grit out of a door track and see if the drag improves. Wipe the hardware and look for pitting. Those checks will tell you a lot about what’s failing and cost nothing.
Replacing an insulated glass unit or a full window or door is a different matter. Impact units are heavy, the glass is fragile in ways standard glass isn’t, and a unit that’s fitted a few degrees off won’t seal, won’t rate, and will let water in at the sill. Every unit we install is set, shimmed and sealed by a background-checked, uniformed technician, and pulled to the correct permit for North Miami. If you’re not sure which side of that line your problem falls on, that’s what a call is for. Reach us at (888) 255-7411 and we’ll tell you straight.
FAQs

Plan on 20 to 25 years for the frame and glass in this climate, and closer to 10 to 15 for the hardware, weatherstripping and seals. Salt air and year-round humidity wear the moving parts faster than the frame, which is why a 12-year-old door might need a hardware refresh while the unit itself is still sound. Call (888) 255-7411 for an exact assessment of your units.
Sometimes, yes. Rollers, sweeps, weatherstripping and hardware are replaceable on their own, and that’s often the whole fix. A fogged insulated glass unit can be swapped without replacing the frame. A cracked frame or failed impact rating can’t be repaired. We’ll tell you which one you’re looking at before quoting anything, and the estimate is free.
A single window or an insulated glass swap is typically a few hours. A door replacement usually runs most of a day, since the opening needs to be fitted and sealed properly. A whole-house window job in North Miami runs two to four days depending on count and access. You’ll get a real arrival window and a written schedule before we start.
We match on the label, the NOA number and the physical measurements, not on a generic “fits most” claim. Where an OEM assembly is the only correct option, that’s what we quote. Where a rated compatible part exists, we price both and let you choose. Either way, the number you see is the number on the invoice.
If you’re in North Miami and a window or door has stopped doing its job, call Penhallow Remodeling at (888) 255-7411 for a free estimate. A live person answers 24/7, you’ll get a written price before any work starts, and the work is backed in writing by the 365-Day Done Right Promise. Estimates on CGI-compatible windows and doors in North Miami are free, and there’s no pressure to book on the call.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












