







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The North Miami Owner’s Guide
If you have a Mr-Glass bathroom product that’s failing, we install and replace Mr-Glass-compatible bathroom components and remodel the rooms around them across North Miami. A full bathroom remodel here typically runs $10,620 to $33,040, and a small bathroom falls between $5,900 and $14,160. Penhallow Remodeling North Miami is an independent service provider and is not affiliated with Mr-Glass; we work with the products, not for the manufacturer.
Most North Miami owners discover the problem the same way. A shower door that used to glide now sticks halfway. The glass sits a little off-square, and water finds the gap. Or a mirror or enclosure panel that took the afternoon sun for years starts to haze at the edges and the frame begins to lift from the wall. In this climate, that’s rarely a sudden failure. It’s humidity, salt air, and daily temperature swings working on seals and hardware long before anything visibly breaks.
Key Takeaways
- Installed bathroom remodels in North Miami run $10,620 to $33,040; small bathrooms $5,900 to $14,160.
- Match the part to your Mr-Glass model by series name and a tape-measure check, not by eye.
- Most failures show up as sticking, wandering glass, or seal haze before anything cracks.
- We give a written price before work starts and a written guarantee on every job.
Which Mr-Glass Models This Applies To

Mr-Glass builds bathroom products across several lines, and the part you need depends entirely on which line you own. Framed shower enclosures, frameless units, sliding and pivot doors, mirrors, and vanity glass each use different hardware and different glass thicknesses. The number that matters is on the product label or the original installation paperwork, usually a series identifier plus a model code. If the label is gone, we measure: glass thickness (frameless units are commonly 3/8 inch, framed units often thinner), panel height and width to the nearest eighth of an inch, and the hinge or roller pattern on the door.
Here’s the compatibility gotcha that trips people up: two Mr-Glass doors that look identical from the outside can use different roller or hinge sets depending on the production series, and the mounting holes won’t line up across them. Ordering by photo is how homeowners end up with a part that almost fits. For Mr-Glass specifically, an OEM part guarantees the exact original fit. A quality aftermarket equivalent can be perfectly sound and often costs less, but only once you’ve confirmed the series and the hole pattern match. We source the right part for your model rather than forcing a generic piece to work, and we’ll tell you plainly when aftermarket is the smarter buy and when it isn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Bathroom Remodeling Is Failing
- The door sticks or drags. Rollers wear flat or the track collects grit and mineral film, so the door rides rough. Left alone, the drag stresses the frame and the glass edge.
- The glass sits off-square in the opening. Hinges or the mounting hardware have loosened or shifted, and a door that’s out of alignment strains the glass every time it swings.
- Haze, cloudiness, or spots that won’t wipe off. North Miami’s humidity and salt air etch the edges and seals over time. That’s surface damage, not dirt, and cleaning won’t reverse it.
- Water escaping at the seals or frame. Worn sweeps, gaskets, or caulk let water past, which feeds mildew and quietly damages the substrate behind the tile.
- The frame lifts or the seal breaks at the wall. Movement and moisture work the fasteners loose, and once the seal fails, water gets behind the unit where you can’t see it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Pricing in North Miami depends on the scope, not just the part. A glass-and-hardware swap on an existing enclosure costs far less than a full bathroom remodel, and the room around the glass usually sets the number. Here’s the honest range:
| Scope of work | Installed range in North Miami |
|---|---|
| Full bathroom remodel | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
What drives the range: glass thickness and size, the hardware series, whether the substrate behind the tile is sound or needs replacement, and whether we’re swapping a part or rebuilding the surround. Every homeowner gets a written price before any work starts, so the number on day one is the number on the invoice. Parts and labor are itemized, and the work carries our 365-Day Done Right Promise in writing. If something we installed fails inside that year, we come back and make it right at no charge, plus a free return visit if a repair fails, with no re-inspection fee.
DIY or Call Us?
Some checks are safe and worth doing yourself. Confirm your Mr-Glass model from the label or paperwork. Measure the glass thickness and opening. Look for loose hinge screws, worn sweeps, or clouding at the edges. That tells you what you’re facing before you spend anything.
Where DIY goes wrong: frameless shower doors are heavy, tempered glass, and a door that shifts or drops during a solo rehang can shatter or crush a hand. Adjusting hinges on a glass panel under load isn’t a job to learn on a Saturday. And the water damage hiding behind a failed seal is a substrate problem, not a caulk problem. We’re background-checked, uniformed technicians, and our technicians have up to 22 years of experience with this exact work. Call (888) 255-7411 and we’ll help you sort out what your Mr-Glass unit actually needs.
FAQs

How long does a Mr-Glass bathroom component last in North Miami? Expect roughly 10 to 15 years from quality glass and hardware in this climate, often less near the coast, because humidity and salt air wear seals, sweeps, and finishes faster than in drier markets. Regular cleaning of the track and prompt replacement of worn sweeps extends that. Call (888) 255-7411 for an exact quote.
Can the part be repaired instead of replaced? Sometimes yes. Worn rollers, sweeps, gaskets, and caulk are often repairable, while cracked glass or a failing seal that’s let water in usually means replacement. We’ll tell you which you’re looking at before quoting a full remodel. Call (888) 255-7411 to schedule a free estimate.
How long does the swap take? A hardware or seal repair is usually a short visit, while a shower or full bathroom remodel takes days to a couple of weeks depending on scope and substrate. We give you a real arrival window and hold to it. Call (888) 255-7411 for a written timeline and price.
How do you source the right Mr-Glass part? We confirm your series and model from the label and careful measurements, then match the part to that exact specification rather than guessing from a photo. Where a quality aftermarket equivalent fits and saves you money, we’ll say so. Call (888) 255-7411, and we’ll walk you through your options. We also service KraftMaid, Cambria, and Silestone products alongside Mr-Glass.
Whether you’re replacing a single failed part or remodeling the whole bathroom around it, the first step is knowing the real number. Penhallow Remodeling North Miami gives you a written price before any work starts, a real arrival window, background-checked and uniformed technicians, and the 365-Day Done Right Promise behind the job. A live person answers our phone around the clock, so there’s no voicemail maze to work through. Call (888) 255-7411 for a free estimate and get an honest read on what your Mr-Glass bathroom needs.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












