







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Pinewood, FL
We provide independent Mr-Glass service across Pinewood, FL, from screen enclosure and patio door repairs to walk-in shower glass and impact windows. The thing that makes our Mr-Glass work different here is Miami-Dade’s High-Velocity Hurricane Zone: every glazed opening we touch in Pinewood has to carry a valid NOA product approval and pass the county’s inspection sequence. We do the work to manufacturer spec. Call (888) 255-7411 to schedule a free estimate.
Why Pinewood Residents Choose Us for Mr-Glass Service

We know Mr-Glass assemblies closely – the aluminum frame profiles, the roller and track hardware on sliding patio doors, the panel gaskets and sealants that hold a screen enclosure tight against summer rain. That familiarity matters in Pinewood because so much of the local housing stock is older: 1950s to 1970s CBS (concrete block and stucco) homes with flat or low-pitch roofs, where an enclosure or door opening has had decades to settle and go out of square.
Our technicians have up to 22 years of experience, and we source genuine Mr-Glass glass, screens, and door hardware wherever it’s available so the NOA approval on the assembly stays valid. We’re an independent provider, not affiliated with or authorized by Mr-Glass, so our reputation rests on how the work holds up and how it reads to a county inspector. We cover the whole 33167 ZIP and answer the phone around the clock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Pinewood
These are the failures we see most on Pinewood Mr-Glass assemblies, and each one ties back to something specific about this area.
- Aluminum frame corrosion and pitting on screen enclosures. Pinewood’s salt-laden humid air works on fasteners and frame members until they pit and pull loose, and panel retention starts to fail. Caught early, it’s a hardware and fastener fix. Left long enough, several members are compromised and a partial rebuild makes more sense.
- Dragging sliding patio door panels. On Pinewood’s 1950s-70s block homes, decades of settling throw the track slightly out of level, so rollers wear unevenly and panels jump the track. New rollers and a re-squared track usually solve it.
- Failed sealant and gasket joints at panel-to-frame interfaces. Heavy summer rain plus intense UV breaks down the joints, and water shows up at the sill and where the frame meets the stucco. Resealing the transition properly stops the intrusion.
- Mismatched replacement glass or screen after a past storm repair. An unapproved panel quietly breaks the Miami-Dade NOA compliance chain, which surfaces as an inspection problem on resale or when you re-permit. We document the assembly so it holds up.
- Out-of-square openings on older block homes. When the stucco opening has moved over the years, a new frame tied into it needs to be re-squared and re-anchored, not just bolted in place.
Mr-Glass Service in Pinewood: What Local Conditions Mean for Your Equipment
Pinewood sits inside Miami-Dade’s High-Velocity Hurricane Zone. That single fact governs almost every Mr-Glass job here. A screen enclosure, patio door, or glazed opening replaced in Pinewood has to carry a valid NOA product approval and survive the county’s inspection sequence, which is a different path than in neighboring areas where replacement glazing is often pulled under a simpler permit. This is why product choice isn’t cosmetic. A generic panel that fits the frame can still fail inspection if it isn’t a listed component of the approved assembly. It also shapes what we recommend: on older CBS homes, we keep the frame and approved panels intact wherever the structure allows, because changing one piece of a listed assembly can turn a small repair into a full re-permit. That code burden is real, and out-of-county contractors routinely underestimate it on small Pinewood jobs.
Mr-Glass Models & Products We Service in Pinewood
We work on the Mr-Glass product families most common on Pinewood homes: Florida room and screen enclosure systems in aluminum-frame vertical and mansard configurations; sliding glass patio door units and replacement panels; screened pool cage and lanai enclosure packages; and custom shower and interior glass panel units.
For exterior assemblies, we use genuine Mr-Glass frame profiles, rollers, glass, and screen panels wherever they’re available, so the NOA product approval stays intact. Quality aftermarket hardware is fine for interior shower glass and non-structural fittings. We don’t stock parts locally – we source to each job, which means the right component for the assembly rather than the closest thing on hand.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Pinewood

Here’s what our Mr-Glass work typically runs in Pinewood. Reach out for anything outside these lines and we’ll price it in writing before any work starts.
| Service | Typical range |
|---|---|
| Walk-In Shower Installation | $4500 – $12000 |
| Impact Window Installation | $8000 – $25000 |
| Window Replacement | $4500 – $15000 |
| Bathroom Remodel | $9000 – $28000 |
What moves the number up or down is mostly the assembly itself: enclosure size, the number of openings, whether the frame can be saved or needs rebuilding, and whether the componentry is a listed part of an approved assembly. Our free estimate includes a look at the actual frame and sill condition, not just a measurement. Call (888) 255-7411 for an exact quote.
Serving Pinewood, FL – Our Local Coverage Area
We serve Pinewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Pinewood
Yes. Pinewood is in Miami-Dade’s High-Velocity Hurricane Zone, so a replaced enclosure or patio door has to carry a valid NOA product approval and pass the county’s inspection sequence. That’s why we match components to a listed assembly. Call (888) 255-7411 and we’ll walk you through what your specific opening needs.
Salt-laden humid air plus intense sun attacks aluminum frames and fasteners year-round, so pitting and pull-out show up sooner here than in drier climates. Once fasteners lose their grip, panel retention is compromised. An early hardware and reseal visit is cheaper than waiting for multiple members to fail.
Usually, yes. On these block homes the track is often set slightly out of level by decades of settling, so the panel drags and jumps. New rollers, a re-squared track, and fresh gaskets bring most doors back to smooth operation. Replacement only makes sense if the frame itself is compromised.
Not directly – your permit is tied to your assembly, not the neighboring construction. But the dense infill does mean inspectors are on these blocks constantly, and a non-compliant panel that might have slipped by years ago gets noticed now. Get it documented properly the first time.
No. We’re an independent provider – not affiliated with, authorized by, or a warranty agent for Mr-Glass. We source genuine Mr-Glass parts where available and install to spec, and our work stands on its own. Call (888) 255-7411 to schedule a free estimate.
Service Areas Near Pinewood
We also serve homeowners in Westview, West Little River, North Miami, North Miami Beach, and Miami Beach. If you’re just outside the 33167 ZIP, reach out and we’ll confirm coverage for your Pinewood service area address.
Book Your Mr-Glass Service in Pinewood Today
Ready to get your Mr-Glass enclosure, patio door, or glazing sorted? Call (888) 255-7411 for a free estimate. We answer day or night, and we’ll give you a written price before any work starts. Our technicians arrive on time and in uniform. Learn more about our Mr-Glass service and the assemblies we handle.
Written by the team at Penhallow Remodeling North Miami.












