







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Driveway & Pavers: The North Miami Owner’s Guide
If a Schluter paver or driveway system on your North Miami property has lifted, cracked, or started letting water underneath, we can match the correct profile and install it. Installed paver driveway work in North Miami typically runs $8,260-$21,240, and we give you a written price before any work starts. Most owners first notice the problem after a heavy summer rain, when water pools at a corner or a paver rocks underfoot.
Schluter is best known for tile and substrate systems, and its driveway and paver profiles work as edge restraints, drainage channels, and decoupling layers that keep pavers from spreading and keep water moving away from the slab. When one of those pieces fails, the failure almost always shows up in the pavers above it before you can see the profile itself.
Key Takeaways
- Installed paver driveway work in North Miami runs $8,260-$21,240 depending on square footage, base prep, and drainage.
- Edge restraint failures show up as spreading pavers and rocking corners within one wet season.
- We’re an independent North Miami service provider, not affiliated with Schluter; we install to their specs and match the correct part.
- Every project gets a written price up front and our 365-Day Done Right Promise.
Which Schluter Models This Applies To

Schluter’s driveway and paver product lines are narrower than their tile catalog, and that’s where most North Miami owners get stuck. The parts you’ll encounter most are edge-restraint profiles (rigid metal edging that holds the paver field in place), drainage profiles (channel and grate systems that move runoff), and the substrate-side components that sit under the paver bed. Each has series-specific dimensions, and those dimensions have to match the joint width and paver thickness on your project, not just the brand name.
The fastest way to identify the correct part is to read the profile itself. Schluter stamps the profile name and sometimes a size code on the product, usually on the visible face of metal edging or on the channel body of a drainage piece. If you can pull a loose paver and photograph what’s underneath, we can usually confirm the match from that photo alone. Write down the joint width and the paver thickness: those two numbers, in inches or millimeters, tell us which profile thickness is correct.
On OEM versus aftermarket: for Schluter, we source the genuine profile when it’s available and correctly sized, because the profile’s dimensions and finish are the whole point. Where a genuine piece is discontinued or unavailable in the right size, we tell you that plainly and walk you through the closest functional equivalent. We don’t stock parts and we don’t carry them on a truck; we source what your project needs before we arrive. Our technicians have up to 22 years of experience matching profiles to real-world jobs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Driveway & Pavers Is Failing
Here’s what a failing Schluter driveway or paver system actually looks like on a North Miami property. The profile is rarely the first thing you notice; the pavers above it tell you what’s wrong.
- Pavers spreading at the driveway edge or along a garden border. This almost always means the edge restraint has shifted, corroded, or lost its anchoring to the base. Once the edge lets go, the field follows.
- Rocking pavers near a corner or a driveway apron. A rocking paver means the base under it has settled or washed out, and the profile meant to hold that base together is no longer doing its job.
- Water pooling against the house or in a low spot after a storm. This points to a drainage profile that’s clogged, undersized, or pitched wrong. South Florida rain finds those gaps fast.
- Visible cracks, chips, or rust streaks along a metal edge piece. Rust streaks on an aluminum or steel profile usually mean the coating has failed and the piece is losing structural grip.
- Loose grout, joint sand washing out, or weeds pushing up through a seam. These are joint-level failures that often trace back to a profile that’s out of plane, letting water and seed into the bed.
One reality specific to this climate: the salt air and humidity on North Miami properties accelerate corrosion on metal edge profiles, and the wet season’s daily downpours do the rest. A profile installed without proper anchoring to a solid base can fail within a single wet season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Paver driveway installation in North Miami runs $8,260-$21,240, and that’s the number range that usually matters most here, because a failed Schluter profile rarely fails alone. When we replace the profile, we often have to reset pavers and rebuild the base locally to fix what caused the failure in the first place. A full driveway replacement, if the base is compromised across the whole field, runs $5,900-$16,520. Driveway sealing to protect the finished work runs $295-$825.
The number is driven by three things: the square footage of pavers that need to come up, how much base has to be rebuilt rather than reused, and the drainage corrections the site actually needs. You get all of this as a line-item written price before any work starts, so the number on day one is the number on the invoice. If we open the base and find a problem we couldn’t see from the surface, you hear it from us before we spend another dollar on it.
Every repair and install comes with a written guarantee and our 365-Day Done Right Promise: if something we touched fails inside the first year, we come back and fix it at no charge. A free return visit if the repair fails, with no service-call or re-inspection fee.
DIY or Call Us?
A few things are true DIY territory. You can photograph the exposed profile, measure joint width and paver thickness, note where water pools, and check whether a loose paver lifts cleanly. Those details make our job faster and cheaper.
Where it goes wrong is base and anchoring work, and it goes wrong in a way that’s expensive. Rebuilding a paver bed and re-anchoring an edge profile is heavy lifting, and one thing done wrong at the base means the pavers settle again within a season. Concrete and pavers under load are not a place to learn. The honest split: inspect and document yourself, let us do the base and profile work. Because we source the correct Schluter-compatible profile, you’re not stuck guessing whether the piece you have on hand is the right one.
Call (888) 255-7411 for a free estimate on your North Miami paver driveway. A live person answers 24/7, and you’ll get a written price before any work starts.
FAQs

A properly anchored profile on a solid base typically lasts 10-20 years, but in North Miami’s salt air and wet-season cycles, a poorly anchored one can fail within one or two seasons. Corrosion and base settling are the two biggest lifespan shorteners, so anchoring and base prep matter more than the profile itself.
Often, yes. If the failure is localized to an edge run or a drainage piece and the base under the surrounding pavers is still sound, we can reset the affected profile and re-lay the pavers without touching the whole driveway. If the base is compromised across the field, replacing only the profile just delays a larger failure. We tell you which one you’re looking at before you spend anything.
A single edge or drainage section usually takes one day. When the repair pulls up pavers and rebuilds base, plan on two to four days depending on square footage and how much base needs work. We confirm an arrival window before the job and give you the schedule in writing.
We match your profile by reading the stamped name and measuring joint width and paver thickness, then source the correct piece for your project. We don’t stock parts, so the right piece comes ordered for your job rather than pulled off a truck. If the exact profile is discontinued, we tell you and walk you through the closest functional equivalent.
Call (888) 255-7411 to schedule your free estimate on a Schluter paver driveway repair or install in North Miami. Our technicians arrive in uniform, background-checked, and ready to give you a written price before any work starts. We also install KraftMaid cabinetry, Cambria and Silestone countertops on the interior side when a remodel runs hand-in-hand with the outdoor work.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












