







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Home Additions & ADU: The North Miami Owner’s Guide
We build Schluter-compatible home additions and ADUs in North Miami, and the installed numbers here run $53,100 – $153,400 for an addition and $106,200 – $259,600 for a full ADU. The system matters more than the part: Schluter’s KERDI waterproofing and DITRA uncoupling membranes sit under the finish, so when one of those layers fails in a North Miami addition, you rarely see the membrane itself. You see a loose tile in the new bath, a grout line that keeps cracking, or a musty smell along the base of a newly framed wall after a wet season. That’s usually how owners find us.
Which Schluter Models This Applies To
Schluter doesn’t build “additions.” It builds the layers that make an addition survive Florida. That means KERDI and KERDI-BAND for waterproofing, DITRA and DITRA-HEAT for tile over a wood or slab subfloor, KERDI-BOARD for shower walls and tub surrounds, and the KERDI-LINE and KERDI-DRAIN families for the floor drain. Each has its own size range, and the gotcha is thickness: DITRA-25 and DITRA-XL are not interchangeable on a floor where you’re trying to keep the new tile flush with an existing threshold. Measure the old membrane with a caliper or check the printed edge before you order. When we spec a North Miami addition, we match the membrane to the substrate first, then the tile to the membrane. OEM Schluter parts are the safe call for the waterproofing layer, since a knock-off sheet carries no warranty and the labor to redo it costs far more than the sheet did. Penhallow Remodeling North Miami is an independent contractor, not affiliated with Schluter.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Home Additions & ADU Is Failing
- Grout cracking in a straight line over a seam: the uncoupling membrane has debonded from the subfloor, usually where a new addition meets the original slab and the two move at different rates.
- Loose or hollow-sounding tile: trapped moisture under a failed KERDI seam in a new bath. A tap test with a screwdriver handle will tell you which tiles have let go.
- Musty smell at the baseplate after heavy rain: water getting behind KERDI-BOARD where the wall meets the floor, a common find in North Miami additions built to older framing details.
- Shower pan holding water or draining slow: a KERDI-DRAIN flange that’s no longer bonded, letting the mortar bed stay saturated.
- Tile lifting at an outside corner: thermal movement across a Florida sun-exposed slab, where the membrane was run short of the edge.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For North Miami, a home addition runs $53,100 – $153,400 installed; an ADU runs $106,200 – $259,600; and a garage conversion runs $35,400 – $94,400. Where a remodel touches tile, a full bathroom remodel is $10,620 – $33,040, a walk-in shower installation is $5,310 – $14,160, and a backsplash installation is $945 – $2,950. Those ranges move on scope: square footage, whether the substrate needs rebuilding, and whether we’re replacing a failed membrane or starting fresh. We quote parts and labor as separate lines, so you can see what the Schluter materials cost versus the install. A written price comes before any work starts, and the 365-Day Done Right Promise covers the workmanship in writing for a full year.
DIY or Call Us?
You can safely check a few things yourself: tap-test the tile for hollow spots, look at the shower pan for standing water, and feel for soft spots along the base of a new wall. What you shouldn’t do is pull up a tile and try to re-bond a KERDI seam yourself. Waterproofing is a continuous layer, and a patch that doesn’t overlap correctly will leak again in a season. On an addition, the failure is often at a joint you can’t see until the floor comes up. Call Penhallow Remodeling North Miami at (888) 255-7411 and we’ll walk you through it or send someone out.
FAQs

How long should a Schluter membrane last under a floor? Twenty years and more when it’s installed over a properly prepared substrate with sealed overlaps. The membrane rarely fails first; the bond does, and in North Miami heat the weak point is almost always a seam or a slab joint.
Can the membrane be repaired instead of replaced? Sometimes. A localized seam failure under a small area can be patched if we can get to it cleanly. A failed pan or a debonded field usually means pulling the tile and starting over, and we’ll tell you which you’re looking at after a look.
How long does a tile-over-membrane swap take? A shower or a single room is typically a few days; a whole addition where the floor comes up is longer. We give you the window in writing before we start.
How do you source the Schluter part? We order by spec, not by memory: the model number, the thickness, and the roll size come off the label or a measurement. If the part is back-ordered, we say so rather than substituting a sheet that won’t match, and call us at (888) 255-7411 for a free estimate.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












