







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU: The North Miami Owner’s Guide
We build Silestone-clad home additions and ADUs in North Miami in the $53,100 – $153,400 range for an addition and $106,200 – $259,600 for a full ADU, and we put the price in writing before anything gets pulled or poured. Most owners don’t arrive at this page because a “part” failed. They arrive because a finished addition is showing the problem: Silestone seams reading through the floor, a slab edge that has lifted, cabinets racking under a countertop that was never supported right, or a half-built ADU where the last crew walked off site. That’s where we come in.
Key Takeaways
- Silestone quartz needs a structurally flat substrate; additions in North Miami’s flood zones shift more than most homeowners expect.
- Written price before work starts, a defined arrival window, and the 365-Day Done Right Promise back every project.
- We’re an independent remodeling company, not affiliated with Silestone; we build to their installation standards.
- Live person answers (888) 255-7411, day or night.
Which Silestone Models This Applies To

Silestone is engineered quartz, so the “part” varies by what’s actually failing. If it’s a countertop or vanity top in your addition, the relevant spec is the slab series (the Jumbo and standard slab formats run in different thicknesses, typically 12mm, 20mm, and 30mm) and the edge profile cut into it. If it’s a structural failure in the addition itself, the Silestone is a symptom, not the cause: quartz doesn’t bend, it cracks. Identify what you have by looking for the fabricator’s label on the underside of the slab or asking the previous installer, then measure the actual thickness with a caliper, because nominal “2cm” and real 2cm are not the same number.
On the OEM-versus-aftermarket question: Silestone doesn’t sell “parts” the way a garage door company sells springs. There’s no serial-numbered unit to match. What matters is the fabricator and the substrate below. For an ADU where the countertop sits over a new cabinet run, the decision is about the substrate and support, not a bolt-on replacement. We work with Silestone alongside KraftMaid and Cambria when a job calls for another line, and we read every spec sheet before a slab is cut.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Home Additions & ADU Is Failing
- Hairline cracks radiating from a sink or cooktop cutout. That’s almost always flex under the cutout, meaning the substrate was never flattened to spec. Silestone won’t tolerate a hollow span.
- Seams opening along a long countertop run. In North Miami, humidity swings and slab movement pull at the epoxy; a seam that opens within a year usually points to a rushed, poorly keyed joint.
- Slab edge lifting off the cabinet run. Either the cabinets weren’t shimmed level or the addition’s floor settled after the install, and the countertop took the load.
- Water staining or soft spots at the base of an ADU wall. North Miami sits low and drains slow; a crawlspace or slab edge without proper grading shows up first as a wet wall.
- Doors and windows in the addition no longer closing clean. Frame racking from settlement, which will eventually crack anything rigid sitting on top of it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the numbers look like in the North Miami market. These are installed ranges, parts and labor together, so you’re not chasing a separate fabrication bill:
- Home addition (Silestone-clad kitchen or bath included): $53,100 – $153,400
- ADU construction: $106,200 – $259,600
- Garage conversion to living space: $35,400 – $94,400
- Countertop installation within the addition: $2,360 – $7,670
- Cabinet installation: $4,720 – $15,340
- Kitchen remodel as part of the addition: $16,520 – $53,100
What drives the range: foundation type, whether the addition touches a flood zone, roof tie-in, and the slab series and edge profile you choose. We hand you a written line-item price before any work starts, and the number on day one is the number on the invoice. The 365-Day Done Right Promise covers the work in writing, and if something fails inside that window, we come back at no charge.
DIY or Call Us?
You can safely check a few things yourself: run a level across the countertop to see if it’s flat, look for gaps at the seam, and check grading around the addition so water runs away from the wall. What you shouldn’t do is try to reset or re-glue a Silestone slab. Engineered quartz is heavy, cut edges are sharp, and a slab that lets go while you’re under it does real damage. The same goes for foundation cracks or anything involving the structural frame of an addition. That’s licensed, inspected work, and a wrong repair makes the next one cost more. Call (888) 255-7411 and describe what you’re seeing. We’ll tell you honestly whether it’s a repair or a rebuild.
FAQs

A properly installed Silestone top over a flat substrate should hold 15 to 25 years or more. In North Miami, the weak point isn’t the stone, it’s the movement below it, so the substrate and the settling of the addition decide the lifespan more than the slab itself.
Sometimes, yes. A single seam can often be re-epoxied and polished in a few hours. A crack running out of a cutout usually means the support failed, and patching it just delays the next crack. We’d rather fix the cause than sell you a top that fails again.
A seam repair is a same-day visit. A countertop replacement runs one to three days including fabrication. A full addition or ADU is a weeks-to-months project, and we give you the real schedule in writing up front, not a best guess.
We order from recognized slab suppliers and match the series and thickness to your spec, and we’ll show you the slab before it’s cut. No parts sit on a shelf; each piece is fabricated for your job. Call (888) 255-7411 for a free estimate.
If your addition or ADU has a Silestone problem, or you’re planning one and want a real number before you commit, call Penhallow Remodeling North Miami at (888) 255-7411 for a free estimate. A live person answers around the clock, our technicians are background-checked and arrive in uniform, and you’ll hold a written price and a written guarantee before a single tool comes out of the truck.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












