







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The North Miami Owner’s Guide
Bathroom remodeling in North Miami typically runs $10,620 – $33,040 for a full gut-and-rebuild, with a small bathroom remodel landing between $5,900 and $14,160. That price covers the full scope: demo, plumbing rough-in, waterproofing, tile, vanity, fixtures and finish. Where Tamko enters the picture is the waterproofing layer behind your tile – and it’s the layer nobody sees until it fails.
Owners around North Miami usually discover the problem the same way: a soft spot at the shower curb, grout that keeps turning dark no matter how often it’s scrubbed, or a faint musty smell that returns a few weeks after every cleaning. By the time tile starts to lift, the substrate underneath has been wet for months. Tamko waterproofing membranes and tile underlayment are designed to keep that water out of the assembly – when they’re installed correctly and when the right product meets Florida’s humidity.
Which Tamko Models This Applies To

Tamko makes a range of roofing and waterproofing products, and its bathroom-relevant lines are the waterproofing membranes and tile-setting underlayments used in wet areas. The common confusion we see in North Miami is homeowners matching a membrane to the wrong substrate: a product rated for a cement board substrate gets installed over plywood, or a sheet membrane gets paired with an unmodified thinset that won’t bond to it. Check the product label on the roll or box for the substrate specification – it will list the approved surfaces (cement board, exterior-grade plywood, cured mortar bed) and the thinset type required. If the label is gone, measure the membrane thickness and photo the printed code before ordering anything.
OEM versus aftermarket is the real decision here. Tamko-branded membranes have their own installation spec, and using a competitor’s thinset or primer voids nothing on the membrane itself but can void the manufacturer’s limited warranty if the bond fails. In practice we install to the membrane maker’s spec, full stop. We’re an independent remodeling company, not affiliated with Tamko, so we’ll tell you plainly when a Tamko-compatible product is the right call and when a different waterproofing system fits your particular shower better.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
Waterproofing failures in North Miami’s climate move fast because the humidity never gives the assembly a chance to dry out. Here’s what we look for on a first visit:
- Grout that darkens and won’t stay clean. The grout is wicking moisture from behind the tile – the membrane or the thinset bed has failed somewhere below.
- Soft or spongy floor near the shower curb or toilet. Water has reached the substrate. On a wood subfloor this means rot has started; on a slab it means the thinset has debonded.
- Lifted or hollow-sounding tile. Tap a tile gently with a screwdriver handle. A hollow sound means the tile has separated from the thinset, usually because moisture vapor is pushing up through the assembly.
- Musty smell that returns after cleaning. This is active mold growth in the wall cavity or subfloor, not surface mildew. Surface cleaners won’t reach it.
- Efflorescence (white chalky powder) on grout lines. Mineral salts being pushed out as water moves through the assembly. A reliable early signal that moisture is traveling where it shouldn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Full bathroom remodels in North Miami run $10,620 – $33,040 depending on bathroom size, tile selection, whether the layout changes, and how much water damage we find once the old assembly is open. A walk-in shower installation on its own runs $5,310 – $14,160; a tub-to-shower conversion runs $4,130 – $11,800; a straight shower replacement runs $3,540 – $10,030. Vanity installation alone is $945 – $3,540.
What drives the number up: relocating plumbing, a slab-on-grade bathroom, large-format tile with tight tolerances, and any rot or mold remediation discovered after demo. Every project begins with a written price before work starts – not a range, a written number we hold ourselves to. If a scope change is needed mid-job, you get a written change order signed before any extra work begins. The 365-Day Done Right Promise covers every project: if something fails inside the year, we come back and fix it at no charge, backed in writing.
DIY or Call Us?
What you can safely check yourself: whether the grout is cracking, whether the tile sounds hollow when tapped, whether the caulk at the shower base has pulled away, and whether there’s visible water staining on the ceiling below. Those observations are useful – photograph them and bring them to a free estimate.
Where DIY goes wrong on a bathroom waterproofing job is the substrate and the membrane. Getting a sheet membrane flat, lapped correctly and bonded to the right thinset takes a practiced hand, and a single pinhole under the tile becomes a full tear-out six months later. We’ve opened up plenty of shower walls where the homeowner did everything right on tile and everything wrong on waterproofing. Call (888) 255-7411 and we’ll walk you through what a proper assembly looks like for your bathroom before you commit to anything – the estimate is free, the written price is free, and your call is answered by a live person any hour of the day.
FAQs

How long does bathroom waterproofing last in North Miami? A properly installed membrane over the right substrate should hold 15 – 25 years in a Florida bathroom, but that assumes the assembly can dry between uses – which means an exhaust fan running every shower. Bathrooms with no fan or a fan vented into the attic often fail in half that time.
Can the waterproofing be repaired instead of replaced? Sometimes – a localized membrane failure at a corner or curb can be spot-repaired and re-tiled without a full tear-out. But once moisture has reached the substrate, a repair is a patch over active rot, and it won’t hold. The only way to know which you’re facing is to open a small section and look. Call (888) 255-7411 for a free estimate and we’ll tell you honestly which one your bathroom needs.
How long does a full bathroom remodel take? A full bathroom remodel in North Miami runs 3 – 5 weeks door to door, with tile and waterproofing on the long end of that. Small bathroom remodels typically finish in 2 – 3 weeks. You’ll get a written schedule before work starts and a defined arrival window on day one, and if it changes, you hear it from us first.
How do you source the Tamko-compatible parts? We source through trade distributors, not big-box shelves, so the membrane, thinset and primer come from the same product family with the manufacturer’s spec in hand. We’re happy to show you the product labels before install so you know exactly what’s going behind your tile. Materials throughout the job are drawn from trade brands – KraftMaid, Cambria and Silestone among them – and the same standard applies to what’s behind the wall. Call (888) 255-7411 to schedule your free estimate.
Call Penhallow Remodeling North Miami at (888) 255-7411 for a free estimate on your North Miami bathroom remodel. Every project starts with a written price, a real arrival window and the 365-Day Done Right Promise in writing.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












