







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Bathroom Remodeling: The North Miami Owner’s Guide
Bathroom remodeling with Techo-Bloc surfaces typically runs $10,620 – $33,040 installed in North Miami, depending on the size of the room, the product line, and whether we’re reworking the substrate underneath. Penhallow Remodeling North Miami installs Techo-Bloc and Techo-Bloc-compatible bathroom surfaces for homeowners across North Miami – and we put the price in writing before any work starts.
Most owners don’t start with a parts question. They start with a symptom: a grout line along the shower floor that keeps crumbling no matter how many times it’s patched. A textured shower wall that has started to feel slick underfoot, or dark shadow lines where water sits against the curb. Sometimes it’s a slab vanity top with a hairline crack that shows up months after installation, or tile that has lifted slightly at a corner because the thinset never bonded to a damp substrate. In South Florida, we see that last one a lot.
Which Techo-Bloc Models This Applies To

Techo-Bloc makes a range of porcelain and stone-look surfaces that work in bathrooms: shower walls and floors, large-format slabs, textured step treads used as curb caps, and decorative wall block that some North Miami homeowners use on accent walls or half-walls. The part you’re looking for depends on which of those surfaces failed and where.
Before you order anything, measure. Not the box – the actual installed piece. Techo-Bloc lines are not interchangeable, and the same “look” can come in different face dimensions, thicknesses, and edge profiles depending on the series. We’ve seen owners order a replacement based on a photo and end up with a piece that’s a quarter-inch too thick to sit flush against the existing tile field.
There are two typical routes. An OEM Techo-Bloc part matches the original exactly – same series, same face dimension, same tolerances – but the lead time may be longer, especially for non-stock profiles. A quality aftermarket equivalent in the same size and material class (a comparable porcelain or natural stone tile) can fill the gap faster and at a lower part cost, but the color and texture may vary slightly from lot to lot. For a shower floor, that small variance matters. For an accent wall, most people don’t notice. We walk through the trade-off with you before anything is ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Bathroom Remodeling Is Failing
Here’s what we actually look for when a North Miami owner calls us about a Techo-Bloc bathroom surface:
- Grout that cracks or crumbles within a few months of repair. This usually means the substrate is moving or water is getting behind the tile. Repointing alone won’t fix it if the movement is still there.
- Hollow sound when you tap the tile. A dull, hollow tone means the thinset didn’t bond fully to the cement board substrate (the moisture-resistant layer behind your tile). In a humid North Miami bathroom, an unbonded tile can fail within a year.
- Lifted corners or edges. Often tied to moisture infiltration or a substrate that wasn’t properly sealed before installation. It’s common on shower floors and around curbs.
- Water pooling against the curb or at the drain pan. The slope under the tile may have been off from the start. We’ve redesigned a few of these in North Miami where the factory pan was fine but the mud bed wasn’t set to pitch.
- Cracks in a large-format slab. Usually a point-load issue or a slab too thin for the span. It doesn’t always mean the slab was defective – it can mean the wrong thickness was spec’d for a vanity top that sees real weight.
If you’re seeing two or more of these, the repair isn’t cosmetic. The part you need to replace is usually the substrate or the waterproofing layer, not just the surface piece.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A Techo-Bloc bathroom remodel in North Miami typically lands between $10,620 and $33,040 installed. A smaller bathroom runs closer to $5,900 – $14,160. The number moves based on three things: the square footage of the floor and wall surfaces, the product line you choose (some Techo-Bloc series cost more per square foot than others), and whether we need to redo the waterproofing or repair the substrate.
What’s included in that range: removal of the failed surface, preparation and sealing of the cement board substrate, installation of the replacement Techo-Bloc piece or compatible surface, grout and sealant, and cleanup. The written price you receive before work starts is the price on the invoice. No change orders after demo day.
Every repair carries our 365-Day Done Right Promise: if the work fails within the first year, we come back and make it right at no charge, and the return visit is free. That’s not a verbal handshake – it’s in writing on every project.
DIY or Call Us?
Some checks you can do yourself safely:
- Tap each tile with a plastic tool handle and listen for hollow spots.
- Look for shadow lines at the base of the shower, especially along the curb and drain pan rim.
- Check whether the caulk at the corners or the floor-to-wall joint has pulled away. If it has, water is getting in somewhere.
What we’d steer you away from doing yourself: pulling the failed piece to inspect the substrate. In a shower, that’s the moment the waterproofing layer gets breached, and water damage behind tile is far worse than the visible problem. We’ve seen North Miami bathrooms where an owner pulled a loose tile and ended up with a soggy wall cavity and a full waterproofing rebuild. It’s not worth the risk to save a call. Our technicians are background-checked, arrive in uniform, and carry up to 22 years of experience on surface installation and substrate work.
Call (888) 255-7411 for a free estimate – we’ll give you a written number and a written guarantee before anything is ordered or torn out.
FAQs

With proper substrate preparation and sealed waterproofing, a well-installed Techo-Bloc floor or shower surface should last 15 to 20 years or more. The part that fails first isn’t the tile – it’s the grout joint and the substrate. In North Miami’s humidity, we recommend resealing grout every two to three years to stay ahead of moisture intrusion. Call us for a free assessment if you’re unsure of the condition.
Sometimes, yes. If the substrate is sound and the failure is a single cracked tile or a lifted corner, we can isolate and replace that piece. If the substrate or waterproofing layer has failed, part replacement alone won’t hold – we’ll walk you through both options and the cost of each in writing before you decide. Estimates are free.
A single-tile replacement or isolated surface swap usually takes half a day to one day. A full shower floor or bathroom surface replacement runs three to five days on site, including substrate prep and cure time. We give you an arrival window and stick to it. Call (888) 255-7411 and we’ll give you a realistic timeline for your specific room.
We source Techo-Bloc parts through the same recognized trade channels we use for every project – and we also work with the broader brands our customers ask for, including KraftMaid, Cambria, and Silestone when the job calls for a different material match. For a Techo-Bloc piece specifically, we confirm the series and face dimension against the installed product before ordering, so the replacement you get actually fits the first time.
Penhallow Remodeling North Miami is an independent service provider and is not affiliated with Techo-Bloc.
If you’re ready to get a real number for your North Miami bathroom repair or replacement, call (888) 255-7411 for a free estimate. We answer live, we show up when we say we will, and you get the price and the guarantee in writing before any work starts.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












