







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The North Miami Owner’s Guide
We install Therma-Tru-compatible roofing components in North Miami, and a typical installed roof repair on a Therma-Tru assembly here runs $470 – $2,125, with full roof replacement spanning $9,440 – $23,600 depending on the deck and material. We quote in writing before any work starts, and we’re an independent service provider, not affiliated with Therma-Tru.
Most owners don’t go looking for a roofing problem. They find it after a hard summer storm in North Miami when a ceiling stain appears in a hallway, or when a neighbor points out a lifted shingle edge from the street. Others notice a gritty residue in the gutter or a shingle tab in the yard after wind. The part gets discovered the same way every time: water found a path, and the roof detailing over a Therma-Tru entry or porch assembly is usually where it started.
Which Therma-Tru Models This Applies To

Therma-Tru is known first for entry doors and door systems, and their fiberglass and steel door lines often sit under porch roofs, porticos and covered entries. The roofing work that pairs with those assemblies is the flashing, the transition membrane and the overhang detailing that keeps water out of the wall above the door. It isn’t a proprietary Therma-Tru roof part you order from a catalog; it’s the weatherproofing system built around the opening.
To identify what you actually have, start at the door frame. Look for a label or sticker on the hinge-side jamb, usually a small foil or paper tag with the series and size. Measure the rough opening width and height to the nearest eighth of an inch. Therma-Tru door slabs and frames come in standard nominal sizes, and the flashing kit or head flashing you need is matched to that opening, not to a model number alone.
The OEM-versus-aftermarket call matters here. A factory head flashing or sill pan made for the Therma-Tru system fits the frame profile exactly, which saves labor and reduces callbacks. A quality aftermarket membrane or metal flashing can work just as well when it’s sized correctly and installed with the right overlaps. What fails is mismatched sizing: a flashing meant for a different rough opening, or a piece cut down on site until the overlap is too thin. We check the label and the measurement before anything gets ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
- Water stains on the ceiling inside the entry. This usually means the head flashing above the door has separated from the wall, letting water track behind the siding and down into the framing.
- Peeling paint or soft wood at the door head. Moisture trapped at the transition rots the trim and the sheathing underneath, and soft wood near a Therma-Tru frame is a sign the flashing has been leaking for a while.
- Lifted or curled shingles above the porch. In North Miami heat, adhesive strips soften and shingle edges lift, and once they lift, wind gets under them and the seal breaks for good.
- Grit in the gutter or granules in the yard. Granule loss is the surface of an aging shingle shedding, and it points to a roof at the end of its service life rather than a single bad part.
- Daylight or a draft at the top corner of the door frame. This means the seal between the roof assembly and the wall has opened, and it’s an entry point for both water and the humid North Miami air.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Pricing in North Miami depends on whether we’re re-flashing the entry or replacing the roof over it. Here’s how the numbers break down for Therma-Tru-related roofing work:
| Work | Installed range |
|---|---|
| Roof repair (flashing, membrane, local shingle) | $470 – $2,125 |
| Tile roof repair | $710 – $2,950 |
| Full roof replacement | $9,440 – $23,600 |
| Metal roof installation | $17,700 – $47,200 |
The range moves with roof pitch, how much decking needs replacing, whether the flashing is a simple head detail or a full portico rebuild, and the material you choose. We give you a written line-item price before work starts: parts, labor and disposal listed separately, so you can see what the flashing kit costs and what the install costs. Every job carries our 365-Day Done Right Promise in writing. If something we installed fails inside the year, we come back and fix it at no charge, and the return visit is free.
DIY or Call Us?
You can safely check a few things yourself. Look at the ceiling inside the entry for stains. Check the trim above the door for soft spots with a screwdriver. Look at the shingles over the porch from the ground with binoculars. What you shouldn’t do is climb up to re-flash or re-seal the roof-to-wall transition yourself. This work happens at height on a pitched surface, and the overlap details that keep water out are easy to get wrong. A flashing job done from a ladder in the Florida sun, with the wrong overlap or the wrong sealant, usually leaks again within one rainy season. That’s not a scare tactic; it’s just how flashing fails.
If you’ve seen a stain, a soft trim board or a lifted shingle, call (888) 255-7411. We’ll look at it, tell you plainly whether it’s a repair or a replacement, and give you a written number before anything starts.
FAQs

A properly flashed shingle roof over an entry typically lasts 15 – 20 years in North Miami’s sun and salt air, while metal can run longer. The flashing around the door frame is the part that fails first, often years before the shingles, because the caulk and sealant at the transition break down faster than the roof surface does.
Often yes. If the shingles over the entry are still sound and the leak is confined to the head flashing or a small membrane failure, a local repair in the $470 – $2,125 range usually solves it. We tell you when a repair is the honest answer and when patching would just delay a replacement.
A flashing repair is usually a partial day, while a full roof replacement over the entry or porch takes a few days depending on size and weather. We give you a defined arrival window and keep the work area clean each day.
We match the flashing and membrane to your door’s rough opening and roof detail, using factory-fit components where they exist and quality aftermarket equivalents when they perform the same. We don’t claim to carry parts on a truck, and we confirm the fit before ordering. Call (888) 255-7411 for a free estimate.
We also work with KraftMaid, Cambria and Silestone on the interior side of these projects, so if the leak has reached your cabinets or counters, one call covers it.
Call Penhallow Remodeling North Miami at (888) 255-7411 for a free estimate. You’ll get a written price before any work starts, a real arrival window, background-checked technicians in uniform, and our 365-Day Done Right Promise in writing. A live person answers the phone 24/7.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












