







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Windows & Doors: The North Miami Owner’s Guide
We install Therma-Tru-compatible windows and doors throughout North Miami, with most full entry-door replacements landing between $5,310 and $17,700 installed and impact-rated installations running $9,440 to $29,500. When a Therma-Tru product starts to fail, it almost never fails all at once. Owners in North Miami usually notice it first as a door that sticks in July humidity, a draft along the lock side, or a sweep that suddenly scrapes the tile. Then the glass fogs between the panes, or the hinge plate pulls loose and you realize the screws have nothing solid left to bite into. That slow progression is normal for coastal South Florida, and it tells you a lot about which part is actually the problem.
We’re an independent service provider, not affiliated with Therma-Tru.
Which Therma-Tru Models This Applies To

Therma-Tru makes fiberglass and steel entry doors sold under the Fiber-Classic, Smooth-Star and Classic-Craft lines, plus patio door systems and a range of sidelites and transoms. The parts don’t cross over cleanly between them. A Smooth-Star slab takes a different hinge prep and sweep profile than a Fiber-Classic, and the older Classic-Craft lines use heavier hinge spacing than current production. If you’re ordering a replacement slab, sweep, sill or hinge set, the model number on the door edge label (or on a sticker inside the jamb) matters more than the catalog photo. Matching the label gets you the right part the first time.
The OEM-versus-aftermarket call is worth thinking through. Genuine Therma-Tru parts fit exactly, cost more, and carry Therma-Tru’s own limited warranty on the component. Quality aftermarket sweeps, sills and weatherstrip can cost 30% to 50% less and work fine when the profile matches, but the cheap universal sweeps sold at box stores are a common source of callbacks in North Miami – they don’t seat to the threshold correctly and they leak. We source recognized brands so the products behind the work match the promise. We don’t carry inventory, and we don’t claim to stock Therma-Tru parts on a truck. Every part is ordered to the specific model and measured before it ships.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Windows & Doors Is Failing
- The door drags or won’t latch in summer. Fiberglass and steel slabs expand in humidity, and a settled hinge plate or swollen jamb is usually the cause – not the slab itself.
- Fogging or condensation between the glass panes. The insulated glass unit’s seal has failed. In South Florida heat and salt air, that seal typically gives out before the door body does.
- Water stains or a soft spot at the sill. The sill pan or threshold sweep is letting water in. This is the one worth catching early – a rotted sill plate is a much bigger repair than a $40 sweep.
- Daylight showing around the frame or lock side. The weatherstrip or door sweep has compressed or torn, which kills both the seal and the deadbolt’s grip on the strike plate.
- Hinges that won’t hold screws. The hinge reinforcement or the wood behind it has failed. Screws back out on their own within weeks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what North Miami homeowners typically see for Therma-Tru-compatible work, installed:
| Scope | Typical Installed Range |
|---|---|
| Window replacement (standard, non-impact) | $5,310 – $17,700 |
| Impact window installation | $9,440 – $29,500 |
| Entry door replacement | $5,310 – $17,700 (within window range) |
| Sweep, sill or weatherstrip repair | Quoted per job |
The range is driven by glass type (impact-rated glass costs more and is often required near the coast), door size, whether the frame is rebuilt, and whether you’re replacing a slab or the full unit. We give you a written, line-item price before any work starts – parts, labor and disposal listed separately – so the number on day one is the number on the invoice. Every job carries our written 365-Day Done Right Promise: if it’s not done right, we come back and fix it at no charge.
DIY or Call Us?
An owner can safely check a lot of this. Run a dollar bill around the closed door to find the draft. Look for daylight at the sill and lock side. Check the glass for fogging between panes. Confirm the model number on the jamb label. Those checks cost nothing and tell us exactly what to order.
Where DIY goes wrong on Therma-Tru doors: setting a new insulated glass unit or slab requires getting the shimming and reveal tolerances right, and a door that’s out of square by a few millimeters won’t seal no matter how good the sweep is. Sill-pan water repairs also mean opening the threshold, and if there’s rot underneath, patching over it just moves the leak. If the frame or glass is involved, this is a call-a-professional job. If the symptom is water at the sill, that’s not something to sit on. We answer the phone 24/7 with a real person and can schedule a free estimate at (888) 255-7411.
FAQs

How long does a Therma-Tru door or window last in North Miami? A Therma-Tru door body typically lasts 15 to 20 years, but glass seals and sweeps in coastal South Florida climate usually need attention every 8 to 12 years. Salt air and humidity speed up the wear. Call (888) 255-7411 for an exact quote – estimates are free.
Can a Therma-Tru part be repaired instead of replaced? Often yes. A sweep, weatherstrip or hinge set can usually be swapped without replacing the door or glass. Fogged glass and sill rot mean replacement, not repair. We’ll tell you honestly which it is after a walkthrough, and the estimate is free.
How long does a Therma-Tru window or door swap take? A single door sweep or weatherstrip job is usually a short visit. A full slab or insulated glass unit replacement typically takes most of a day, and a full unit swap with frame rebuild can run longer. We give you a real arrival window and stick to it. Call (888) 255-7411 to book your estimate.
How do you source the correct Therma-Tru part? We match the model number on your door’s jamb label, measure the profile, and order the specific part – genuine Therma-Tru or a quality aftermarket match – before scheduling. No guessing, no universal fits. Call (888) 255-7411 for a free written estimate.
We also work with KraftMaid, Cambria and Silestone products on other parts of the home.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












