







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ViewLux Home Additions & ADU: The North Miami Owner’s Guide
ViewLux home additions and ADUs in North Miami typically run $53,100 to $153,400 for a standard addition and $106,200 to $259,600 for a full accessory dwelling unit, quoted in writing before any work begins. We’re an independent remodeling company that works with ViewLux-compatible projects and parts, and we’re not affiliated with ViewLux itself. Most owners start here because something already went wrong: a foul smell under a converted garage slab, a hairline crack that reappears every wet season, a window that fogs after a summer storm, or a room that never cools properly no matter what the thermostat says. That’s usually the moment the “add a little space” dream meets a real structural or moisture problem in a North Miami home built on the same thin limestone-and-sand base as most of the neighborhood.
Which ViewLux Models This Applies To

“ViewLux” is a project line, not a residential component with a model plate bolted to it, so compatibility here means rooting the right spec into the right assembly. The four ViewLux project types we see in North Miami are: a standard room addition (bedroom, in-law suite, expanded kitchen), a detached or attached ADU, a garage conversion, and a sunroom or lanai enclosure. On all four, the parts that fail first, and the ones a homeowner actually searches for, are the tie-in elements: the foundation/slab interface, the impact-rated windows and doors, the roof-to-wall flashing, the exterior door threshold, and the HVAC load calculation behind the whole thing.
Identify what you’ve actually got before you buy anything. Pull the permit records from the City of North Miami building department (the address and project scope are on the permit itself), then match that scope to your part. If the addition ran under a specific wind-load or impact standard, the replacement window or door must carry a matching Florida Product Approval (FL#) number – a standard window from a big-box store usually won’t have one for your opening.
OEM versus aftermarket matters differently per part. For an impact window or door, get the OEM-matched frame profile and glass; the Florida Product Approval is tied to that exact assembly, and a mixed assembly can void your insurability. For a slab, threshold, flashing or HVAC tonnage question, a quality aftermarket spec matched to your footprint works fine and often costs less. We don’t keep a stock of parts and we don’t carry parts on a truck – each replacement is matched to your project and sourced for it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ViewLux Home Additions & ADU Is Failing
Here’s what usually tells an owner something has gone wrong, and the cause underneath it.
- Recurring hairline cracks in the floor or drywall above the tie-in. The slab or footing under the addition is settling differently from the main house, a common issue in North Miami’s shallow limestone base once summer rain softens the soil.
- Musty smell or soft flooring at a garage conversion. The original garage slab was never built to shed moisture as living space, so rising damp wicks up through flooring that wasn’t set on a proper vapor barrier.
- Fogging or condensation between window panes. The insulated glass seal on impact or standard windows has failed, which is a replacement, not a repair, once the desiccant is saturated.
- Water staining at the ceiling line where the addition meets the original roof. The roof-to-wall flashing or kick-out was under-detailed, letting wind-driven rain in during a tropical downpour.
- A room that won’t cool and a high electric bill. The HVAC load for the added square footage was never calculated against the heat gain of that glazing and insulation, so the system runs short.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For the part or sub-assembly that’s failing, expect these installed ranges for North Miami. Every one is a written line-item number before work starts – no range that balloons after demo.
| Repair / component | Installed range |
|---|---|
| Slab / foundation tie-in repair | $5,310 – $14,160 |
| Impact window or door replacement | $9,440 – $29,500 |
| Roof-to-wall flashing & repair | $470 – $2,125 |
| Garage conversion moisture / floor fix | $35,400 – $94,400 (full conversion) |
| Full addition (context) | $53,100 – $153,400 |
| ADU construction (context) | $106,200 – $259,600 |
What drives the range: whether the fix is a patch or a full re-do, whether permits and inspection are needed (a slab or window swap on an existing permit typically needs re-inspection), the impact standard your glazing must meet, and how much is hidden until we open it up. Parts and labor are quoted separately and in writing. The work is covered by our 365-Day Done Right Promise – if it fails inside the guarantee period, we come back and fix it at no charge.
DIY or Call Us?
Some checks are safe for an owner: confirm permit records, photograph the crack or stain, note where water enters, check whether fogging is on the inside or between panes. That’s diagnosis, not repair. What isn’t safe is anyone touching the structural tie-in, the slab, the roof flashing, or the electrical and gas connections that feed a converted space – those are load- and code-sensitive, and a wrong move on a North Miami addition can compromise the whole structure or fail inspection. HVAC load and impact-glazing spec also sit in regulated territory. If you’re unsure which you’re facing, call (888) 255-7411 and we’ll tell you honestly whether it’s a repair, a replacement, or nothing to worry about yet.
FAQs

How long should a ViewLux addition or ADU last before something needs replacing? A properly built addition or ADU should hold its structural tie-in for decades; what wears first in North Miami are the glazing (impact window units commonly fog within 10 – 20 years), flashing (15 – 25 years in coastal sun and rain), and the HVAC (10 – 15 years in a Florida climate). The parts fail on their own timelines, not the building’s.
Can the part be repaired instead of replaced? Sometimes – flashing can often be re-detailed, and a slab crack can be stabilized. But a fogged insulated glass unit, a failed impact window seal, or an undersized HVAC system can’t be repaired; they must be replaced to spec. We’ll tell you which you have before quoting.
How long does the swap take? A window or door replacement is typically a day per unit; flashing repair is one to two days; a slab or structural tie-in repair runs several days and usually needs an inspection. Install days are confirmed in a written arrival window.
How do you source the part? We match the OEM spec for anything tied to a Florida Product Approval (impact glazing, doors) and source a quality aftermarket equivalent for slab, flashing, and HVAC. Parts are quoted as a line item with brand and spec, so you see exactly what’s going in. Call (888) 255-7411 for an exact quote – estimates are free.
If you’re weighing a fix against a fuller ViewLux project in North Miami, the first step is a free written estimate. Call (888) 255-7411 – a real person answers, day or night – and we’ll walk your addition or ADU, give you a written price before any work starts, and put our 365-Day Done Right Promise behind the job. We also work with recognized trade brands like KraftMaid, Cambria, and Silestone when a project calls for cabinetry or countertops alongside the repair.
Written by the team at Penhallow Remodeling North Miami, serving North Miami and nearby areas.












